|
|
| Line 1: |
Line 1: |
| $ ssh lraid5
| | There are further settings that will modify '''FXP.One''''s engine behavior which are not part of the definition of a site. Since we are allowed to define any variable name, which is automatically stored, some extra definitions have been created. |
| Last login: Sun Jul 3 09:14:04 2011 from totoro
| |
| Oracle Corporation SunOS 5.11 snv_151a November 2010
| |
| lundman@solaris:~$ sudo bash
| |
| Password:
| |
| root@solaris:/home/lundman# # uname -a
| |
| SunOS solaris 5.11 snv_151a i86pc i386 i86pc Solaris
| |
|
| |
|
| Drives attached to the system:
| | Since essentially '''Extra Site''' and '''Client Site''' commands are the same thing, they are separated because [[Extra Site]] lists additional commands which the '''FXP.One''' engine will act on. Where as [[Client Site]] commands are stored by clients, for clients. The '''FXP.One''' engine does not parse these key/value pairs. |
|
| |
|
| # cfgadm -al
| | * USE_XDUPE |
| Ap_Id Type Receptacle Occupant Condition
| | * STARTDIR |
| sata1/0::dsk/c10t0d0 disk connected configured ok
| | * FXP_TLS |
| sata1/1::dsk/c10t1d0 disk connected configured ok
| | * IMPLICIT_TLS |
| sata1/2::dsk/c10t2d0 disk connected configured ok
| | * LISTARGS |
| sata1/3::dsk/c10t3d0 disk connected configured ok
| |
| sata1/4::dsk/c10t4d0 disk connected configured ok
| |
| sata1/5 sata-port empty unconfigured ok
| |
|
| |
|
| (Ok, there should be a disk in sata1/5, but the kids probably popped it out)
| |
|
| |
|
| | ==Details== |
|
| |
|
| === pools === | | USE_XDUPE=<yna> |
| | * Auto - If XDUPE is reported in the FEAT reply code, it will be enabled and used. |
| | * Yes - Forced on, regardless of FEAT reply. |
| | * No - Forced off, regardless of FEAT reply. |
|
| |
|
| There are two parts to ZFS. The "pool" of storage, and "file-systems". All pool commands are done with "zpool" and all filesystem commands are done with "zfs".
| | STARTDIR=<str> |
| | * Optional extra for clients to issue '''CWD''' to <str> upon connection, instead of staying in default root "/". |
|
| |
|
| | FXP_TLS=<yna> |
| | * Auto - Use secure (SSL) data transfers if possible, otherwise plain-text, using CCSN or SSCN. |
| | * Yes - Always attempt secure (SSL) data transfers, fail if not possible. |
| | * No - Do not attempt secure data transfers, always use plain-text. |
|
| |
|
| List your pools, you will initially only have the boot pool:
| | The '''FXP_TLS''' option is added in addition to '''data_TLS''' as it was deemed insufficient for those who would like to force directory listings to use secure methods, but disable secure data transfers, even if sites supported such transfers. If '''FXP_TLS''' is not defined, '''FXP.One''' engine will use the default behavior as specified by '''data_TLS'''. |
|
| |
|
| # zpool list
| | IMPLICIT_TLS=<yna> |
| NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT
| | * Auto - Do not use Implicit SSL/TLS |
| rpool 29.8G 5.46G 24.3G 18% 1.00x ONLINE -
| | * No - Do not use Implicit SSL/TLS |
| mypool 4.53T 1.39T 3.14T 30% 1.00x DEGRADED - | | * Yes - Attempt implicit SSL challenge immediately upon connecting, before FTP commands. |
|
| |
|
| Default boot is called "rpool" in Solaris, you can change the name if you want.
| |
|
| |
|
| | LISTARGS=<str> |
| | * Usually, FXP.Ones uses default LIST arguments ("-lL") but you can over-ride that per site by setting LISTARGS. |
| | * For example, LISTARGS=-sl, or even "LISTARGS= " for no arguments. |
|
| |
|
| Check out the status of your zpools:
| | === Future === |
|
| |
|
| # zpool status
| | MAX_SESSIONS=<int> |
| pool: rpool | | * Limit number of sessions allowed for one site. Attempts to create another session will be presented with an error. |
| state: ONLINE
| |
| scan: none requested
| |
| config:
| |
|
| |
| NAME STATE READ WRITE CKSUM
| |
| rpool ONLINE 0 0 0
| |
| c10t0d0s0 ONLINE 0 0 0
| |
|
| |
| errors: No known data errors
| |
|
| |
| pool: mypool | |
| state: DEGRADED
| |
| status: One or more devices has been removed by the administrator.
| |
| Sufficient replicas exist for the pool to continue functioning in a
| |
| degraded state.
| |
| action: Online the device using 'zpool online' or replace the device with
| |
| 'zpool replace'.
| |
| scan: resilvered 27.5G in 0h21m with 0 errors on Thu Jun 30 16:19:20 2011
| |
| config:
| |
|
| |
| NAME STATE READ WRITE CKSUM
| |
| mypool DEGRADED 0 0 0
| |
| raidz1-0 DEGRADED 0 0 0
| |
| c10t5d0 REMOVED 0 0 0
| |
| c10t4d0 ONLINE 0 0 0
| |
| c10t3d0 ONLINE 0 0 0
| |
| c10t2d0 ONLINE 0 0 0
| |
| c10t1d0 ONLINE 0 0 0
| |
| logs
| |
| /dev/zvol/dsk/rpool/slog ONLINE 0 0 0
| |
|
| |
| errors: No known data errors
| |
|
| |
|
| | | MAX_QUEUES=<int> |
| As you can see, "rpool" is the boot pool (root pool), on disk "c10t0d0". (controller 10, target 0, device 0, slice 0). Slice is "partition" in Solaris world. Device is no longer used, as it is a legacy thing from scsi days. "rpool" is a single disk pool.
| | * Limit the number of '''active queues''' a site is allowed to be involved with. When '''GO''' commands are received |
| | | * check the total active queues, and if already over the limit, leave queue in IDLE state. Automatically start queue |
| My main data pool, "mypool" is missing a disk, but otherwise fine lookin'. Finally the "slog" of "mypool" (transaction logs in ZFS) is stored on SSD, this is for speed. This is a "raidz1" (raid 5) setup. I can lose one disk without data loss. (20% used on parity). Use "raidz2" if you want to be able to lose 2 HDDs without loss. (40% used on parity), and so on. You can also "mirror" (raid1).
| | * once an active queue goes to IDLE. |
| | |
| | |
| === File systems === | |
| | |
| ZFS has two kinds of filesystems. Regular ZFS file system, and a "Virtual-Volume". The latter creates a virtual block device (fake disk) which you can then use as a regular disk, ie, format it "ext3" if you really want to, mount it etc. In this case, we create a Volume for "swap", and for "slog". The size of both ZFS-fs, and Volumes, can be changed on the fly.
| |
| | |
| | |
| Listing your filesystems:
| |
| | |
| # zfs list
| |
| NAME USED AVAIL REFER MOUNTPOINT
| |
| rpool 8.04G 21.2G 93K /rpool
| |
| rpool/ROOT 2.84G 21.2G 31K legacy
| |
| rpool/ROOT/realtek 2.84G 21.2G 2.71G /
| |
| rpool/ROOT/solaris 2.04M 21.2G 2.52G /
| |
| rpool/dump 1019M 21.2G 1019M -
| |
| rpool/export 141M 21.2G 32K /export
| |
| rpool/export/home 141M 21.2G 32K /export/home
| |
| rpool/export/home/lundman 141M 21.2G 141M /export/home/lundman
| |
| rpool/slog 2.06G 21.9G 1.36G -
| |
| rpool/swap 2G 23.1G 123M -
| |
|
| |
| mypool 1.11T 2.45T 55.9K /mypool
| |
| mypool/backup 232G 2.45T 232G /backup
| |
| mypool/data 1.42G 2.45T 1.42G /data
| |
| mypool/secure 906G 2.45T 906G /media
| |
| mypool/swap 2G 2.45T 25.6K -
| |
| mypool/test 54.3K 2.45T 54.3K /mypool/test
| |
| | |
| | |
| Note that default Solaris creates lots of little filesystems, one for each boot (realtek & solaris), one for "dump", "swap", "export" "export/home" and "export/home/lundman". But then, filesystems are really cheap in ZFS, so, why not. Gives you lots of control. Traditionally filesystems were quite monolithic, where as in ZFS they are closer to "mkdir".
| |
| | |
| Checking the attributes of the "rpool":
| |
| | |
| # zpool get all rpool
| |
| NAME PROPERTY VALUE SOURCE
| |
| rpool size 29.8G -
| |
| rpool capacity 18% -
| |
| rpool altroot - default
| |
| rpool health ONLINE -
| |
| rpool guid 15126656221277650189 default
| |
| rpool version 31 default
| |
| rpool bootfs rpool/ROOT/realtek local
| |
| rpool delegation on default
| |
| rpool autoreplace off default
| |
| rpool cachefile - default
| |
| rpool failmode wait default
| |
| rpool listsnapshots off default
| |
| rpool autoexpand off default
| |
| rpool dedupditto 0 default
| |
| rpool dedupratio 1.00x -
| |
| rpool free 24.3G -
| |
| rpool allocated 5.46G -
| |
| rpool readonly off -
| |
| | |
| You won't change the pool attributes that often, but in this case, "failmode" defines what the system should do if the pool as a failure. In this case "wait" (ie, hang until it is fixed.) Which is not so useful. It is often better for it to "continue" in failure mode, so we can try to fix it.
| |
| | |
| # zpool set failmode=continue rpool
| |
| | |
| autoreplace controls if it should automatically replace dead HDD with new HDDs, if it detects you have replaced the hardware. Why not? Unless you want to manually try the commands of course.
| |
| | |
| autoexpand controls if it should automatically make the pool larger, when all HDDs in the pool have been replaced with larger disks. You probably want this on too.
| |
| | |
| But we are actually looking at "rpool", the SSD, so the last two options do not really make sense. You want to set the for your data pool though.
| |
| | |
| Likewise, ZFS filesystems (and Volumes) also have attributes, these are more fun to play with.
| |
| | |
| # zfs get all rpool
| |
| rpool type filesystem -
| |
| rpool creation Fri Dec 24 2:38 2010 -
| |
| rpool used 8.04G -
| |
| rpool available 21.2G -
| |
| rpool referenced 93K -
| |
| rpool compressratio 1.00x -
| |
| rpool mounted yes -
| |
| rpool quota none default
| |
| rpool reservation none default
| |
| rpool recordsize 128K default
| |
| rpool mountpoint /rpool default
| |
| rpool sharenfs off default
| |
| rpool checksum on default
| |
| rpool compression off default
| |
| rpool atime on default
| |
| rpool nbmand off default
| |
| rpool sharesmb off default
| |
| rpool dedup off default
| |
| rpool encryption off -
| |
|
| |
| (this list is considerably larger, I just picked out some of the juicier options).
| |
| | |
| Most are self-explanatory. But note that "quota" here means the "file-system size". If not set (normal) you can create files in there until the pool is full. If set (say 100G) you can only go to 100G of data.
| |
| "reservation" refers to how much space the fs should reserve in advance. If you set quota to 100G, that directory (user) can fill 100G, but it allocates no space. So if the pool runs out, the user can not actually reach 100G. If you want it to pre-allocate the promised 100G, you set reservation. You probably don't want to. But do note we set it for "swap" since you don't want swap to NOT have the space promised.
| |
| | |
| "sharenfs" and "sharesmb" controls if it should exported as NFS, or samba. atime is good to disable (speed). "compression" is often good to have on (lessens the disk read/write and expense of CPU - alas, does nothing for media like movies).
| |
| | |
| Checking swap:
| |
| | |
| # zfs get all rpool/swap
| |
| rpool/swap compression off
| |
| rpool/swap volsize 2G
| |
| rpool/swap refreservation 2G
| |
| | |
| So, swap set to use 2G of space, pre-allocated. Note your ZFS Volumes can be compressed. So if you put a "ext3" filesystem on it, ZFS will compress the blocks under it, to take up less space. Very sexy.
| |
| | |
| | |
| | |
| | |
| | |
| | |
| You use "format" command in Solaris to play with partitions. This is legacy crap you do no longer need to bother with (Since the boot is already done). Looks like this:
| |
| | |
| # format
| |
| Searching for disks...done
| |
|
| |
|
| |
| AVAILABLE DISK SELECTIONS:
| |
| 0. c10t0d0 <ATA -OCZ-AGILITY -1.4 cyl 3889 alt 2 hd 255 sec 63>
| |
| /pci@0,0/pci1043,8496@11/disk@0,0
| |
| 1. c10t1d0 <ATA-SAMSUNG HD103SI-1113-931.51GB>
| |
| /pci@0,0/pci1043,8496@11/disk@1,0
| |
| 2. c10t2d0 <ATA-SAMSUNG HD103SI-1118-931.51GB>
| |
| /pci@0,0/pci1043,8496@11/disk@2,0
| |
| 3. c10t3d0 <ATA-SAMSUNG HD103SI-1118-931.51GB>
| |
| /pci@0,0/pci1043,8496@11/disk@3,0
| |
| 4. c10t4d0 <ATA-SAMSUNG HD103SI-1118-931.51GB>
| |
| /pci@0,0/pci1043,8496@11/disk@4,0
| |
| Specify disk (enter its number):
| |
| | |
| | |
| Create a pool from disks:
| |
| | |
| # zpool create mypool raidz c10t1d0 c10t2d0 c10t3d0 c10t4d0 c10t5d0
| |
| | |
| You can name it anything you want, don't need to use 'mypool'
| |
| # zpool status mypool
| |
| | |
| zpool don't have to be actual disks either, you can make it on fake files:
| |
| | |
| # mkfile 1G /var/tmp/fakedisk1
| |
| # zpool create playpool /var/tmp/fakedisk1
| |
| | |
| | |
| When you do it "for realz" you want slog on SSD. So create a volume for slog, usually the same size as memory.
| |
| | |
| # zfs create -V 2G rpool/slog
| |
| (-V creates a Volume instead of fs, creating volumes creates a dev node at /dev/zvol/dsk/$poolname/$volumename)
| |
| | |
| # zfs set refreservation=2G rpool/slog
| |
| (pre-allocate the disk space, so slog is guaranteed 2G)
| |
| | |
| # zfs add mypool log /dev/zvol/dsk/rpool/slog
| |
| (Attach the Volume slog from pool rpool, to pool zpool)
| |
| | |
| | |
| | |
| Create a file-system:
| |
| | |
| # zfs create mypool/roger
| |
| mypool/roger 2.5T 55K 2.5T 1% /mypool/roger
| |
| | |
| Don't like where it is mounted?
| |
| | |
| # zfs set mountpoint=/roger mypool/roger
| |
| (Note the dataset name, ie pool+fs, starts with pool name 'mypool', no leading slash). ZFS remounts it for you.
| |
| | |
| And remove it:
| |
| # zfs destroy mypool/roger
| |
| | |
| How you will probably create your media folder:
| |
| | |
| # zfs create -o mountpoint=/media -o atime=off -o compression=on -o encryption=on mypool/secure
| |
| Enter passphrase: $password
| |
| # zfs set sharenfs=rw=@192.168.11,root=@192.168.11 zpool/secure
| |
| | |
| Note I created "mypool/secure" (dataset name) but asked it to be mounted on "/media". Dataset name, vs mountpoint. Just as you can create "mypool/warez" and have it mounted as "/ftp"
| |
| | |
| # zfs list mypool/secure
| |
| mypool/secure 906G 2.45T 906G /media
| |
| | |
| Confirm that the NFS sharing worked:
| |
| | |
| # showmount -e 127.0.0.1
| |
| export list for 127.0.0.1:
| |
| /media @192.168.11
| |
| | |
| CAVEAT: NFS will only work if it can look up hostnames. So your A100/PC needs to live in /etc/hosts on the NAS (and most likely NAS needs to be in hosts on those machines too). Or your router returns some name for those IPs when looked up.
| |
| | |
| When you set "sharenfs" Solaris will automatically share the volume, but you can control it manually as well. | |
| | |
| # zfs shareall
| |
| # zfs unshare mypool/secure
| |
| | |
| But you most likely will only need to "shareall" if you use "encryption" with your filesystem. If you do use encrypted, this is what you do after reboot:
| |
| | |
| # zfs mount mypool/secure
| |
| Enter passphrase: $password
| |
| # zfs share mypool/secure
| |
| (Or # zfs shareall)
| |
| | |
| All ZFS attributes (or are they called properties?) can have user-defined values. As it happens, llink will read properties called "net.lundman:sharellink" and if set to "on" will add to ROOTs.
| |
| | |
| # zfs set net.lundman:sharellink=on mypool/secure
| |
| | |
| | |
| === Troubles ===
| |
| | |
| If you lose a HDD, pull the HDD out of the NAS. And insert a replacement drive.
| |
| | |
| First you need to tell the OS that a new disk is attached:
| |
| | |
| # cfgadm -al
| |
| Ap_Id Type Receptacle Occupant Condition
| |
| sata1/5 disk connected unconfigured ok
| |
| | |
| # cfgadm -c configure sata1/5
| |
| | |
| If you have "autoreplace" set on the pool, you are done. But let's assume you have not.
| |
| | |
| # zpool status
| |
| c10t5d0 FAILED 0 0 0
| |
| | |
| # zpool replace mypool c10t5d0 c10t5d0
| |
| | |
| # zpool status
| |
| action: Online the device using 'zpool online' or replace the device with
| |
| 'zpool replace'.
| |
| scan: resilvered 27.5G in 0h21m (27%) ETA 4 hours 12 minutes.
| |
|
| |
| NAME STATE READ WRITE CKSUM
| |
| mypool DEGRADED 0 0 0
| |
| c10t5d0 FAILED 0 0 0
| |
| c10t5d0/1 replacing 0 0 0
| |
| | |
| | |
| === Snapshots ===
| |
| | |
| | |
| Snapshots can be useful. If you are to try something new, or do some changes, upgrade OS, protect yourself from accidentally deleting all files.
| |
| | |
| # zfs list mypool/secure
| |
| mypool/secure 906G 2.45T 906G /media
| |
| # zfs snapshot mypool/secure@20110708
| |
|
| |
| # zfs list -t all
| |
| mypool/secure 906G 2.45T 906G /media
| |
| mypool/secure@20110708 0 - 906G -
| |
| | |
| To create a snapshot, just give the dataset name (mypool/secure) @ snapshot-name. It can be any name, but as convention, many people use the date. Note the snapshot is taking 0 bytes of space. It only records the differences. So, let's delete something:
| |
| | |
| -rwxrwxrwx 1 501 501 250974208 2007-08-22 19:15 make_big_words.avi
| |
| # rm make_big_words.avi
| |
|
| |
| mypool/secure 906G 2.45T 905G /media
| |
| mypool/secure@20110708 238M - 906G -
| |
| | |
| Deleted 250M worth of data, so the snapshot now takes up 238M.
| |
| | |
| If you are happy with the changes, just destroy the snapshot to release the space back.
| |
| | |
| # zfs destroy mypool/secure@20110708
| |
| | |
| Am I the only one who is unhappy that the same command 'destroy' is used for both? Since "zfs destroy mypool/secure" and "zfs destroy mypool/secure@20110708" are ''vastly'' different.
| |
| Or even "mypool/secure @20110708". Oops, that space....
| |
| | |
| However, if you changed your mind, and want it back:
| |
| | |
| # zfs rollback mypool/secure@20110708
| |
| # zfs list -t all
| |
|
| |
| mypool/secure 906G 2.45T 906G /media
| |
| mypool/secure@20110708 1.60K - 906G -
| |
|
| |
| # ls -l make_big_words.avi
| |
| -rwxrwxrwx 1 501 501 250974208 2007-08-22 19:15 make_big_words.avi
| |
|
| |
| # zfs destroy mypool/secure@20110708
| |
| | |
| | |
| === SMB ===
| |
| | |
| How to share with SMB
| |
| | |
| Enable the SMB servers
| |
| # svcadm enable -r smb/server
| |
| | |
| Join a workgroup
| |
| # smbadm join -w ''workgroup-name''
| |
| | |
| Make sure PAM is told to keep SMB passwords as well:
| |
| | |
| # vi /etc/pam.conf
| |
| other password required pam_smb_passwd.so.1 nowarn
| |
| at the end of the file.
| |
| | |
| Set your password again to save SMB password
| |
| # passwd ''username''
| |
| | |
| Turn on sharing for your dataset
| |
| # zfs set sharesmb=on mypool/secure
| |
| OR
| |
| For example, to specify a resource name of myfs for the ztank/myfs file system, type:
| |
| # zfs set sharesmb=name=myfs ztank/myfs
| |
| | |
| Windows is case insensitive, so you most likely want to share your filesystems like this:
| |
| | |
| # zfs create -o casesensitivity=mixed -o nbmand=on -o sharesmb=name=yourfs ztank/yourfs
| |
| | |
| Verify that it is being shared:
| |
| | |
| # sharemgr show -vp
| |
| | |
| | |
| | |
| === Solaris Admin ===
| |
| | |
| | |
| General Solaris crap:
| |
| | |
| The old SYSV style /etc/init.d and /etc/rc2.d/ still exists, but is no longer used. Some older, or legacy programs, may still put start/stop scripts in there. They will work.
| |
| | |
| The new system uses SMF. List all your services, and states:
| |
| | |
| # svcs -a
| |
| legacy_run Jun_06 lrc:/etc/rc2_d/S72autoinstall
| |
| disabled Jun_06 svc:/network/ipsec/ike:default
| |
| disabled Jun_06 svc:/network/ftp:default
| |
| online Jun_06 svc:/network/ssh:default
| |
| (Insert giant list here).
| |
| | |
| You can see S72autoinstall ran with legacy stuff. You have ipsec/ike, but it is not to run. And you have ssh (daemon) and it is running just fine.
| |
| | |
| If something dies (say, sshd) the SMF system will automatically restart it. This is the main advantage with the new system
| |
| | |
| To enable something to run:
| |
| | |
| # svcadm enable ftp
| |
| You could use "svcadm enable svc:/network/ftp:default" here, but that is a bit tedious, so as long as it is unique, you can shorten it.
| |
| | |
| # svcs ftp
| |
| STATE STIME FMRI
| |
| online Jun_06 svc:/network/ftp:default
| |
| | |
| turn it off:
| |
| | |
| # svcadm disable ftp
| |
| | |
| Restarting:
| |
| | |
| # svcadm restart llink
| |
| | |
| Although, since you know it is going to be restarted automatically, you can just "pkill llink". I mean, it's rude, but works :)
| |
| | |
| If something dies too many times, they can go into "maintenance" state:
| |
| | |
| # svcs llink
| |
| STATE STIME FMRI
| |
| maintenance Jun_06 svc:/network/llink:default
| |
| | |
| Then you need to clear its state first.
| |
| | |
| # svcadm clear llink
| |
| # svcadm enable llink
| |
| | |
| Note that SMF has dependency built in. So ssh it dependent on network/physical etc, and will only start when those run correctly:
| |
| | |
| # svcs -l ssh
| |
| dependency require_all/none svc:/system/filesystem/local (online)
| |
| dependency optional_all/none svc:/system/filesystem/autofs (online)
| |
| dependency require_all/none svc:/network/loopback (online)
| |
| dependency require_all/none svc:/network/physical (multiple)
| |
| dependency require_all/none svc:/system/cryptosvc (online)
| |
| dependency require_all/none svc:/system/utmp (online)
| |
| dependency optional_all/error svc:/network/ipfilter:default (disabled)
| |
| dependency require_all/restart file://localhost/etc/ssh/sshd_config (online)
| |
|
| |
| So if something is not starting, it may not be something wrong with that program, but rather that a dependent service is not running.
| |
| | |
| | |
| There is a "hd" program that lists some bits, like your HDD temperatures:
| |
| | |
| # /data/hd
| |
|
| |
| Device Serial Vendor Model Rev Temperature
| |
| ------ ------ ------ ----- ---- -----------
| |
| c10t0d0p0 43M324HP783S ATA OCZ-AGILITY 1.4 255 C (491 F)
| |
| c10t1d0p0 XHJDWS510824 ATA SAMSUNG HD103SI 1113 31 C (87 F)
| |
| c10t2d0p0 XGJ90Z400082 ATA SAMSUNG HD103SI 1118 35 C (95 F)
| |
| c10t3d0p0 XGJ90SB01390 ATA SAMSUNG HD103SI 1118 34 C (93 F)
| |
| c10t4d0p0 XGJ90Z400080 ATA SAMSUNG HD103SI 1118 34 C (93 F)
| |
| | |
| I assure you that the SSD is not on fire.
| |
| | |
| Power management is in /etc/power.conf
| |
| # cat /etc/power.conf
| |
| device-dependency-property removable-media /dev/fb
| |
|
| |
| autopm enable
| |
| autoS3 default
| |
|
| |
| cpupm enable
| |
| cpu-threshold 1s
| |
| # Auto-Shutdown Idle(min) Start/Finish(hh:mm) Behavior
| |
| autoshutdown 30 9:00 9:00 noshutdown
| |
|
| |
| device-thresholds /pci@0,0/pci8086,244e@1e/pci11ab,11ab@0/disk@0,0 10m
| |
| device-thresholds /pci@0,0/pci8086,244e@1e/pci11ab,11ab@0/disk@1,0 10m
| |
| device-thresholds /pci@0,0/pci8086,244e@1e/pci11ab,11ab@0/disk@2,0 10m
| |
| device-thresholds /pci@0,0/pci8086,244e@1e/pci11ab,11ab@0/disk@3,0 10m
| |
| device-thresholds /pci@0,0/pci8086,244e@1e/pci11ab,11ab@0/disk@4,0 10m
| |
| | |
| | |
| | |
| | |
| * The package manager is called "pkg". | |
| | |
| # pkg list
| |
| | |
| # pkg install gnu-emacs-no-x11
| |
| | |
| # pkg search python
| |
| | |
| | |
| | |
| * llink lives in /usr/local/etc/llink/ with binaries in /usr/local/bin/
| |