|
|
| Line 1: |
Line 1: |
| === MeLE A2000 === | | == MediaInfo-RAR == |
|
| |
|
| === Mele file storage ===
| | Welcome to the MediaInfo-RAR utility page. This is just a small front-end to the famous and most excellent [http://mediainfo.sourceforge.net/en MediaInfo] program, which enables the feature to scan media in RAR archives. In addition to this, it now can handle ISO files, like that of DVDs and bluray in ISO form. Naturally, also ISO inside RAR archives. A new switch was added to let it list the contents of ISO files, so you can find the file you are interested in. By default, it will pick the largest file found. |
|
| |
|
| http://www.lundman.net/ftp/mele/
| |
|
| |
|
|
| |
|
| === v1.3BETA firmware ===
| | [[mediainfo_rar_Example|Example]] output. |
|
| |
|
| Mele_HTPC_0929_BETA_V1.3.rar
| |
| Mele_HTPC_0929_BETA_V1.3.ddimg.bz2
| |
|
| |
|
| Exactly the same issues as v1.2. I can not see anything new, nobody should run this.
| |
|
| |
|
| However, TMerle has taken this image and made it english, removed the annoying apps, and added Google Store. Huzzah!
| | === Sources === |
|
| |
|
| If you want to replace the kernel, with the NIC patched kernel, do this:
| | [http://www.lundman.net/ftp/mediainfo-rar/mediainfo-rar-1.3.0.tar.gz mediainfo-rar-1.3.0.tar.gz] Sources for all platforms. |
|
| |
|
| # wget http://lundman.net/ftp/mele/mele.v1.3.nandc-new
| |
| # dd if=/dev/nandc of=original_nandc.bin bs=65536 # Use /dev/block/nandc if on Android
| |
| # dd if=mele.v1.3.nandc-new of=/dev/nandc bs=65536
| |
|
| |
| Now, when I boot, the wemac NIC doesn't work any more (link stays down). But if I replace the script.bin it works again. I do not know which part of script.bin needs to be fixed. Someone with time could look into this. There are only about 20 lines when you diff them, but none in emac area.
| |
|
| |
|
| # wget http://lundman.net/ftp/mele/mele-1.3-script-fixed.bin
| |
| # mount -t vfat /dev/nanda /mnt
| |
| # cp /mnt/script.bin /mnt/script-original.bin
| |
| # cp mele-1.3-script-fixed.bin /mnt/script/bin
| |
| # umount /mnt
| |
|
| |
|
| For those of you who also wishes to make advantage of the ZFS in the kernel, you additionally need to get:
| | === Binaries === |
|
| |
|
| # wget http://lundman.net/ftp/mele/zpool_builtin-1.3 | | Win32 Windows 32 bit |
| # wget http://lundman.net/ftp/mele/zfs_builtin-1.3 | | [http://www.lundman.net/ftp/mediainfo-rar/mediainfo-rar.1.3.2-win32.zip mediainfo-rar-win32-1.3.2.zip] Windows command line executable, 32bit. |
| # mount -o remount,rw /system
| | [http://www.lundman.net/ftp/mediainfo-rar/mediainfo-rar.1.3.1-win32.zip mediainfo-rar-win32-1.3.1.zip] Windows command line executable, 32bit. (1.3.1 is to fix missing -s option for Windows build) |
| # busybox cp zpool_builtin-1.3 /system/bin/zpool | | [http://www.lundman.net/ftp/mediainfo-rar/mediainfo-rar-win32-1.2.0.zip mediainfo-rar-win32-1.2.0.zip] Windows command line executable, 32bit. |
| # busybox cp zfs_builtin-1.3 /system/bin/zfs
| | [http://www.lundman.net/ftp/mediainfo-rar/mediainfo-rar-win32-1.1.0.rar mediainfo-rar-win32-1.1.0.rar] Windows command line executable, 32bit. |
| # touch /etc/mtab
| |
| # zpool import -d /dev/block yourpoolname
| |
|
| |
|
| Personally, I also recommend:
| | Win64 Windows 64 bit |
| | [http://www.lundman.net/ftp/mediainfo-rar/mediainfo-rar.1.3.2-win64.zip mediainfo-rar-win64-1.3.2.zip] Windows command line executable, 64bit. |
| | [http://www.lundman.net/ftp/mediainfo-rar/mediainfo-rar.1.3.1-win64.zip mediainfo-rar-win64-1.3.1.zip] Windows command line executable, 64bit. |
| | [http://www.lundman.net/ftp/mediainfo-rar/mediainfo-rar.1.3.0-win64.zip mediainfo-rar-win64-1.3.0.zip] Windows command line executable, 64bit. |
|
| |
|
| # cd /system/media/ | | OsX |
| # mv bootanimation.zip bootanimation.zip-orig | | [http://www.lundman.net/ftp/mediainfo-rar/mediainfo-rar-OsX-1.3.0.tar.gz mediainfo-rar-OsX-UB-1.3.0.tar.gz] OsX command line executable, (i386, x86_64). |
| | [http://www.lundman.net/ftp/mediainfo-rar/mediainfo-rar-OsX-1.2.0.tar.gz mediainfo-rar-OsX-UB-1.2.0.tar.gz] OsX command line executable, (i386, x86_64). |
| | [http://www.lundman.net/ftp/mediainfo-rar/mediainfo-rar-OsX-UB-1.1.0.tar.gz mediainfo-rar-OsX-UB-1.1.0.tar.gz] OsX command line executable, Universal Binary (ppc, i386, x86_64). |
|
| |
|
| === v1.2 firmware ===
| | NMT C200 |
| | [http://www.lundman.net/ftp/mediainfo-rar/mediainfo-rar-C200-1.1.0.tar.gz mediainfo-rar-C200-1.1.0.tar.gz] NetworkedMediaTank, x200 series, MIPS32 |
|
| |
|
| Mele_HTPC_120907_Ver1.2.rar | | Linux x86 |
| | [http://www.lundman.net/ftp/mediainfo-rar/mediainfo-rar-Linux-x86-1.2.0.tar.gz mediainfo-rar-Linux-x86-1.2.0.tar.gz] Linux x86 |
| | [http://www.lundman.net/ftp/mediainfo-rar/mediainfo-rar-Linux-x86-1.1.0.tar.gz mediainfo-rar-Linux-x86-1.1.0.tar.gz] Linux x86 |
|
| |
|
| This does not include Google Market/Play Store. Has a strange launch screen that appears not trivial to replace. It is loaded with chinese apps and ad/malware.
| | Linux x64 |
| I would not recommend anyone to run this.
| | [http://www.lundman.net/ftp/mediainfo-rar/mediainfo-rar-Linux_x64-1.3.0.tar.gz mediainfo-rar-Linux-x64-1.3.0.tar.gz] Linux x64 |
| | [http://www.lundman.net/ftp/mediainfo-rar/mediainfo-rar-Linux_x64-1.2.0.tar.gz mediainfo-rar-Linux-x64-1.2.0.tar.gz] Linux x64 |
| | [http://www.lundman.net/ftp/mediainfo-rar/mediainfo-rar-Linux_x64-1.1.0.tar.gz mediainfo-rar-Linux-x64-1.1.0.tar.gz] Linux x64 |
|
| |
|
| === Status ===
| | Solaris x86 |
| | [http://www.lundman.net/ftp/mediainfo-rar/mediainfo-rar-Solaris-x86-1.1.0.tar.gz mediainfo-rar-Solaris-x86-1.1.0.tar.gz] Solaris x86 |
|
| |
|
| Current status with the Mele A2000, Allwinner A10.
| | === Older Sources === |
|
| |
|
| Official release: Android 4 ICS, 4.0.8.
| | [http://www.lundman.net/ftp/mediainfo-rar/mediainfo-rar-1.2.0.tar.gz mediainfo-rar-1.2.0.tar.gz] Sources for all platforms. |
| Kernel: 3.0.31+
| | [http://www.lundman.net/ftp/mediainfo-rar/mediainfo-rar-1.1.0.tar.gz mediainfo-rar-1.1.0.tar.gz] Sources for all platforms. |
|
| |
|
| '''Positive:'''
| |
| * Video playback 1080p
| |
| * MKV playback
| |
| * TS playback
| |
| * YouTube
| |
| * Android market and Games (Angry Birds etc)
| |
|
| |
|
| '''Negative:'''
| | === Changelog === |
| * <s>Network Streaming</s> Fixed. NIC has been patched to allow smooth 1080p steaming
| |
| * Audio. The settings; '''CODEC''' no sound, but probably on RCA. '''HDMI''' choppy sound, unusable. If made to work, only '''stereo''' on HDMI. '''SPDIF''' not working, does not turn on. (No red light)
| |
| * Bitstreaming; Unconfirmed since SPDIF is not functional. But can the hardware bitstream TrueHD, and DTS-MA ?
| |
| * 10bit video does not play (not supported by hardware, CPU too slow for software)
| |
| * AVI/XviD does not play (not supported by hardware, CPU too slow for software)
| |
|
| |
|
| Currently, it is no good for mediaplayer. But if all you want is a toy to play youtube, some android games, and only stereo sound, it is definitely capable.
| | ==== 1.3.0 ==== |
|
| |
|
| | Added "-s" switch to show only the automatically picked "biggest file in archive" and not run MediaInfo. |
| | Updated MediaInfoLib build version to 0.7.52 |
| | Windows mediainfo-rar build could not seek past 4GB boundary. |
|
| |
|
| === Android 4 ICS wired NIC patch === | | ==== 1.2.0 ==== |
| | Added ISO support, using libdvdread-plus library |
| | Added ISO in RAR support. |
| | Added -l (--list) argument to list contents of ISO files. |
|
| |
|
| I have been working on trying to improve the '''wemac''' NIC driver in the Mele A2000 Allwinner A10 hardware, which will stutter when playing 720p/1080p over network. The current patch makes it much better, such that I think it is usable now. There is a '''mynewerimage.img''' image in the storage area, that you can '''dd''' to the '''nandc''' device. I will work on submitting the patch upstream.
| | ==== 1.1.0 ==== |
|
| |
|
| For example, if you boot miniand image:
| | First version. Make it identical in output to normal mediainfo |
| | |
| # modprobe nand # nand.ko on my storage area too | |
| # wget http://lundman.net/ftp/mele/mynewerimage.img
| |
| # dd if=/dev/nandc of=mele_nandc_backup.bin bs=65536
| |
| # dd if=mynewerimage.img of=/dev/nandc bs=65536
| |
| # sync
| |
| # reboot -f
| |
| | |
| And take out the SD card to boot Android again. If you do this using Android, the device node is /dev/block/nandc
| |
| | |
| === Android 4 ICS official Mele image ===
| |
| | |
| The official Mele Android ICS image is out, called '''Mele_HTPC_Android_4.0_V1.rar''' which you need to use PhoenixCard to "burn". Once installed, you can use '''audiopatch1.3.apk''' to enable some sound features. Otherwise it seems quite similar to A10 firmware.
| |
| | |
| For those not using Windows, I also made a '''dd''' image: '''Mele_HTPC_Android_4.0_V1.ddimg.bin.bz2''' [http://lundman.net/ftp/mele/Mele_HTPC_Android_4.0_V1.ddimg.bin.bz2] Just dd the whole thing to your raw device.
| |
| | |
| === Android 4 IceCreamSandwich ===
| |
| | |
| '''Update: the non-beta release of ICS4 came out (for the A10, not Mele's release), which has settings/display, and lets you chose resolution '''
| |
| | |
| For Unix and clones:
| |
| wget http://www.lundman.net/ftp/mele/homlet_4.0_v1.0_20120609_dd.img.lzma
| |
| 7z x homlet_4.0_v1.0_20120609_dd.img.lzma
| |
| sudo dd if=homlet_4.0_v1.0_20120609_dd.img of=/dev/sdX bs=1M
| |
| sync
| |
| | |
| Where you need to replace X in /dev/sdX by the correct letter for your SD card reader.
| |
| Now insert the SD card in your Mele, and wait until the LED stops blinking, remove the SD card and restart the device. Et voila!
| |
| (Read more: [http://www.cnx-software.com/2012/06/18/mele-a1000a2000-android-4-0-image-released/#ixzz1ylfoeKQc]) See I kept the paste URL cos I'm nice! :)
| |
| | |
| | |
| | |
| There is also an audiopatch for the ICS4 image to get sound to work. Copy over '''audiopatch1.2.apk''' (adb, or physical media) to your ICS4, install and run.
| |
| | |
| Not convinced it makes any difference for me. Audio appears not to work still.
| |
| | |
| It appears the contents on audiopatch1.2 is pretty much just libswa.so. Not entirely sure what it thinks to do with it, but if I do a '''find''' from root, there is no such library, before and after running patch.
| |
| | |
| I copied the file by hand:
| |
| | |
| busybox cp /data/data/com.android.audiopatch/files/libswa.so /system/lib/
| |
| | |
| and I get sound playing videos with some audio formats now. Like, TV MKV releases.
| |
| | |
| === Mele A2000 ===
| |
| | |
| I purchased a MeLE A2000 from Tom over at [http://www.aliexpress.com/product-fm/546571245-Mele-A2000-TV-box-Allwinner-A10-hackable-device-wholesalers.html aliexpress], and been playing around with it as well. First I wanted to install ICS4, to do that I downloaded the '''android_4.0.img''' file from the 'net. Alas, there is a large volume of confusing information on what to do with this.
| |
| | |
| [http://www.lundman.net/ftp/mele/ http://www.lundman.net/ftp/mele/]
| |
| [https://www.wuala.com/zercosz/Mele%20A2000/Firmware/?key=ThisIsFC2012 https://www.wuala.com/zercosz/Mele%20A2000/Firmware/?key=ThisIsFC2012]
| |
| | |
| For the MeLE A2000, I also downloaded '''PhoenixCardV303(win7)''' and installed that in my VirtualBox Win7 system, forwarded the OSX USB drive and told it to install '''android_4.0.img'''.
| |
| | |
| [https://www.wuala.com/zercosz/Mele%20A2000/Utilidades%20Mele/?key=ThisIsFC2012 https://www.wuala.com/zercosz/Mele%20A2000/Utilidades%20Mele/?key=ThisIsFC2012]
| |
| [http://www.lundman.net/ftp/mele/ http://www.lundman.net/ftp/mele/]
| |
| | |
| After that, I inserted the SD card into Mele, and rebooted.
| |
| | |
| The power LED will blink RED + BLUE for a while, then power LED will turn off.
| |
| | |
| Take out SDcard, and reboot MeLE. It will now boot ICS, but only on HDMI@720p.
| |
| | |
| I can confirm BubbleUPNP + 2160pPlayer will play 1080p MKVs over network. Nice!
| |
| | |
| | |
| === Google Market/Play ===
| |
| | |
| I installed one of the Terminal programs, and told adb to use TCP (haven't bothered to open my mele yet). Using adb and the instructions found [http://www.slatedroid.com/topic/30855-scripts-allwinner-a10-tablets-google-play-script/ allwinner a10 scripts] I loaded Google Market/Play to the mele.
| |
| | |
| | |
| | |
| === Changing resolution ===
| |
| | |
| This refers to the Beta ICS4. Probably is not useful any more, but I will leave it here for reference.
| |
| | |
| Changing resolution can be done by modifying the boot time scripts that the A10 uses. Usually done on a separate boot partition. For example, the Mele image has the files:
| |
| | |
| mount /dev/mmcblk0p1 /mnt
| |
| ls -l /mnt/
| |
| evb.bin
| |
| | |
| git clone https://github.com/amery/sunxi-tools
| |
| cd sunxi-tools
| |
| make
| |
| ./bin2fex /mnt/evb.bin > evb.fex
| |
| | |
| Edit the file any odd way you want, changing '''screen0_output_type''' and '''screen0_output_mode'''. See modes here: [https://github.com/amery/linux-allwinner/blob/allwinner-v3.0-android-v2/include/linux/drv_display_sun4i.h#L132]
| |
| | |
| ./fex2bin evb.fex > /mnt/evb.bin
| |
| | |
| | |
| If you are running the Android 4 (ICS) Beta that was released, to change the resolution to HDMI 1080p, you can do this. Using either a terminal program on Android (ConnectionBot for example) or the USB Console (if connected).
| |
| | |
| On the mele root shell
| |
| setprop service.adb.tcp.port 5555
| |
| stop adbd
| |
| start adbd
| |
| netstat -na # Check that it is listening on port 5555
| |
| | |
| On remote adb machine
| |
| adb connect 192.168.xxx.xxx # Put in the Mele's IP
| |
| adb shell
| |
| adb> mount -t vfat /dev/block/nanda /mnt/obb
| |
| adb> exit
| |
| adb push script-HDMI-1080p60.bin /mnt/obb/
| |
| adb shell
| |
| adb> cd /mnt/obb
| |
| adb> busybox cp script-HDMI-1080p60.bin script.bin
| |
| | |
| If you don't want to edit the script file yourself, you can download my prepared one:
| |
| [http://www.lundman.net/ftp/mele/script-HDMI-1080p60.bin script-HDMI-1080p60.bin]
| |
| | |
| === U-boot ===
| |
| | |
| Since I added ZFS to u-boot for CuBox, and also patched in Samsungs EXT4 patches, I built hno's u-boot to test.
| |
| | |
| https://github.com/lundman/uboot-allwinner/tree/zfs
| |
| | |
| wget http://lundman.net/ftp/mele/sunxi-spl.bin
| |
| dd if=sunxi-spl.bin of=/dev/sdc bs=1024 seek=8 # Obviously, '''sdc''' is my SDcard, change device to applicable.
| |
|
| |
| wget http://lundman.net/ftp/mele/u-boot.bin
| |
| dd if=u-boot.bin of=/dev/sdc bs=1024 seek=32 # Obviously, '''sdc''' is my SDcard, change device to applicable.
| |
| | |
| U-Boot 2012.04.01-g39085db-dirty (May 29 2012 - 02:29:31) Allwinner Technology
| |
|
| |
| CPU: SUNXI Family
| |
| Board: A10-EVB
| |
| DRAM: 512 MiB
| |
| MMC: SUNXI SD/MMC: 0
| |
| *** Warning - bad CRC, using default environment
| |
|
| |
| sun4i#zfsload
| |
| zfsload - load binary file from a ZFS filesystem
| |
| | |
| sun4i#zfsload mmc 0:2 0x48000000 /boot/@/uImage
| |
| Loading file "/boot/@/uImage" from mmc device 0:2 xxa2
| |
| zfs fsname = '/boot/' snapname='<NULL>' filename = '/uImage'
| |
| 4230340 bytes read
| |
|
| |
| sun4i#bootm 0x48000000
| |
| ## Booting kernel from Legacy Image at 48000000 ...
| |
| Image Name: Linux-3.0.8+
| |
| Image Type: ARM Linux Kernel Image (uncompressed)
| |
| Data Size: 4230276 Bytes = 4 MiB
| |
| Load Address: 40008000
| |
| Entry Point: 40008000
| |
| Verifying Checksum ... OK
| |
| Loading Kernel Image ... OK
| |
| OK
| |
|
| |
| Starting kernel ...
| |
|
| |
| DRAM: 512[ 0.000000] Initializing cgroup subsys cpuset
| |
| | |
| | |
| === Android Kernel ===
| |
| | |
| I wanted to replace the ICS4 kernel with my own, for the nic fixes. These are the steps I took:
| |
| | |
| git clone https://github.com/amery/linux-allwinner
| |
| git branch lichee-3.0.8-sun4i
| |
| make sun4i_crane_defconfig
| |
|
| |
| Check that .config has
| |
| CONFIG_MODVERSIONS=y
| |
| # CONFIG_MODULE_SRCVERSION_ALL is not set
| |
| | |
| The wemac nic was panicing on boot everytime, until I changed this:
| |
| | |
| drivers/net/sun4i/sun4i_wemac.c
| |
| #define PHY_POWER 0 /* was 1 */
| |
| | |
| make uImage
| |
| | |
| From android, I used ConnectBot to make a copy of the 'boot' partition, nandc.
| |
| | |
| adb shell
| |
| adb> dd if=/dev/block/nandc of=/mnt/sdcard/nandc bs=65536
| |
| adb pull /mnt/sdcard/nandc
| |
| | |
| Then split it up into kernel and ramfs, you can find split_bootimg.pl my storage area (url above)
| |
| | |
| # ./split_bootimg.pl nandc
| |
| Page size: 2048 (0x00000800)
| |
| Kernel size: 8410564 (0x008055c4)
| |
| Ramdisk size: 975609 (0x000ee2f9)
| |
| Second size: 0 (0x00000000)
| |
| Board name:
| |
| Command line:
| |
| Writing nandc-kernel ... complete.
| |
| Writing nandc-ramdisk.gz ... complete.
| |
| | |
| The idea is to make a new kernel, that looks roughly the same as nandc-kernel, and re-use the nandc-ramdisk.gz
| |
| | |
| Once the compile has finished, we make a new image. According to the nandc ANDROID! header, the base address for Mele is 0x40000000
| |
| | |
| # mkbootimg --base 40000000 --kernel arch/arm/boot/Image --ramdisk ../nandc-ramdisk.gz -o ../mynewimage.img
| |
| | |
| Now I boot into Miniand image on SD card, use my nand.ko to load the device for /dev/nand*. You can find my Miniand kernel '''uImage''' and '''nand.ko''' in the storage area too. The default Miniand kernel did not come with nand driver.
| |
| | |
| # modprobe nand.ko
| |
| # dd if=mynewimage.img of=/dev/nandc bs=2048
| |
| # sync
| |
| # reboot
| |
| | |
| and remove the SD card to boot Android. If you want to undo, and go back to ICS4, put '''nandc''' file instead of '''mynewimage.img''' in the '''dd''' line above.
| |
| | |
| === Mele's Wired Network Interface ===
| |
| | |
| The wired nic in the Mele is a '''wemac''' from Davidcom. It is unfortunately quite poor. You will get decent 100MB speeds from it, but it uses the CPU. If you do any transfers while trying to watch video (including watching video over network) it will stutter for 1080p. Interestingly if you use SD, or USB while watching, it has no problem.
| |
| | |
| The WIFI driver sits on the USB bus and is not affected by this.
| |
| | |
| Using a USBEthernet dongle (I tried an Apple brand) also works without issues.
| |
| | |
| | |
| === ZFS on Android ===
| |
| | |
| I have already ported ZFS to ARM, so that should just work if you compile ZFS with your kernel. But I also wanted to see if I can get ZFS to work with Android. The modules do load ok, but execution does not work:
| |
| | |
| # cd /mnt/sdcard/
| |
| # insmod spl.ko && insmod zavl.ko&&insmod znvpair.ko&&insmod zunicode.ko&&insmod zcommon.ko&&insmod zfs.ko&&insmod zpios.ko&&cp zpool /mnt/obb/&&chmod 755 /mnt/obb/zpool
| |
| # cd /mnt/obb
| |
| # strace -f ./zpool create melepool /dev/block/sda1
| |
| open("/dev/block/sda1", O_WRONLY|O_EXCL|O_LARGEFILE) = 6
| |
| write(6, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4096) = 4096
| |
| fdatasync(6) = 0
| |
| close(6) = 0
| |
| open("/melepool", O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY|0x80000) = -1 ENOENT (No such file or directory)
| |
| ioctl(3, ITE_GPIO_IN
| |
| | |
| and it hangs.
| |
| | |
| | |
| === djmount for Android ===
| |
| | |
| So one option is to have a mediaplayer with UPNP ability, like that of BubbleUPNP or PlugPlayer. However, both of these do poorly with Mele's remote control. With Bubble you can not click on Directories to enter them, but have to Mouse-Mode in/out to do so.
| |
| | |
| So one option is to mount all UPNP devices as a directory. Since Mele's kernel already comes with FUSE, I compiled '''djmount''' for it (patched version with >2GB size fixed).
| |
| | |
| % adb push djmount /mnt/obb
| |
| % adb shell
| |
| # cd /mnt/obb
| |
| # chmod 755 djmount
| |
| # ./djmount -o allow_other /mnt/sdcard/Pictures # No reason to pick "Pictures" I just wanted an existing directory
| |
| # ls -l Pictures/
| |
| -r--r--r-- root root 49 2000-01-01 20:00 devices
| |
| dr-xr-xr-x root root 2000-01-01 20:00 llink-daemon UPNP Media Server (MediaServer) : 1
| |
|
| |
| # ls -l Pictures/llink-daemon\ UPNP\ Media\ Server\ \ \(MediaServer\)\ \:\ 1/
| |
| dr-xr-xr-x root root 2000-01-01 20:00 DVD
| |
| dr-xr-xr-x root root 2000-01-01 20:00 Game of Thrones
| |
| dr-xr-xr-x root root 2000-01-01 20:00 Music
| |
| dr-xr-xr-x root root 2000-01-01 20:00 Video
| |
| -r--r--r-- root root 14010368 2000-01-01 20:00 movie.m4v
| |
| | |
| And indeed, if you use the File browser in ICS4, you can just enter that directory, and play any video. Note that '''djmount''' is pretty slow on listing directories, and I think we might want to look at speeding that up if we are to use it long term. Also, increase the cache timeout from 60s to something much higher, like 10 minutes.
| |
| | |
| | |
| | |
| === PS3EYE WebCam ===
| |
| | |
| I wanted to see if the PS3 Eye would work with Mele, and Skype.
| |
| | |
| Video:
| |
| | |
| # insmod gspca_main.ko
| |
| # insmod gspca_ov534.ko videomode=13
| |
| | |
| That makes the camera work with Skype and '''Zoom Camera''' app. When I tried one of the 640x480 modes it just hangs, so currently it is 320x240@60.
| |
| | |
| Audio:
| |
| | |
| No idea. The device shows:
| |
| | |
| # cat /proc/asound/cards
| |
| 0 [sun4icodec ]: sun4i-CODEC - sun4i-CODEC
| |
| sun4i-CODEC Audio Codec
| |
| 1 [sun4isndhdmi ]: - sun4i-sndhdmi
| |
| sun4i-sndhdmi
| |
| 2 [CameraB409241 ]: USB-Audio - USB Camera-B4.09.24.1
| |
| OmniVision Technologies, Inc. USB Camera-B4.09.24.1 at usb-sw-ehci-1.3, high sp
| |
| 3 [sun4isndspdif ]: - sun4i-sndspdif
| |
| sun4i-sndspdif
| |
| | |
| And we get the device nodes:
| |
| | |
| # ls -l /dev/snd/
| |
| crw-rw---- system audio 116, 0 2012-07-03 14:12 controlC0
| |
| crw-rw---- system audio 116, 32 2012-07-03 14:12 controlC1
| |
| crw-rw---- system audio 116, 64 2012-07-03 14:12 controlC2
| |
| crw-rw---- system audio 116, 96 2012-07-03 14:12 controlC3
| |
| crwxrwxrwx system system 116, 24 2012-07-03 14:12 pcmC0D0c
| |
| crwxrwxrwx system system 116, 16 2012-07-03 14:12 pcmC0D0p
| |
| crw-rw---- system audio 116, 48 2012-07-03 14:12 pcmC1D0p
| |
| crw-rw---- system audio 116, 88 2012-07-03 14:12 pcmC2D0c
| |
| crw-rw---- system audio 116, 112 2012-07-03 14:12 pcmC3D0p
| |
| crw-rw---- system audio 116, 33 2012-07-03 14:12 timer
| |
| | |
| But no idea how to tell Android to use the USB device as the main microphone.
| |
| | |
| # setprop usb.audio.cap.device pcmC0D0c
| |
| # setprop media.audio.in.mode usb
| |
| | |
| Neither of those work.
| |