MeLe A2000

MeLE A2000

I purchased a MeLE A2000 from Tom over at aliexpress, and been playing around with it as well. First I wanted to install ICS4, to do that I downloaded the android_4.0.img file from the 'net. Alas, there is a large volume of confusing information on what to do with this.

http://www.lundman.net/ftp/mele/ 
https://www.wuala.com/zercosz/Mele%20A2000/Firmware/?key=ThisIsFC2012

For the MeLE A2000, I also downloaded PhoenixCardV303(win7) and installed that in my VirtualBox Win7 system, forwarded the OSX USB drive and told it to install android_4.0.img.

https://www.wuala.com/zercosz/Mele%20A2000/Utilidades%20Mele/?key=ThisIsFC2012
http://www.lundman.net/ftp/mele/ 

After that, I inserted the SD card into Mele, and rebooted.

The power LED will blink RED + BLUE for a while, then power LED will turn off.

Take out SDcard, and reboot MeLE. It will now boot ICS, but only on HDMI@720p.

I can confirm BubbleUPNP + 2160pPlayer will play 1080p MKVs over network. Nice!

Google Market/Play

I installed one of the Terminal programs, and told adb to use TCP (haven't bothered to open my mele yet). Using adb and the instructions found allwinner a10 scripts I loaded Google Market/Play to the mele.

Changing resolution

No idea yet.

U-boot

Since I added ZFS to u-boot for CuBox, and also patched in Samsungs EXT4 patches, I built hno's u-boot to test.

wget http://lundman.net/ftp/mele/sunxi-spl.bin
dd if=sunxi-spl.bin of=/dev/sdc bs=1024 seek=8        # Obviously, sdc is my SDcard, change device to applicable.

wget http://lundman.net/ftp/mele/u-boot.bin
dd if=u-boot.bin of=/dev/sdc bs=1024 seek=32          # Obviously, sdc is my SDcard, change device to applicable.

U-Boot 2012.04.01-g39085db-dirty (May 29 2012 - 02:29:31) Allwinner Technology 

CPU:   SUNXI Family
Board: A10-EVB
DRAM:  512 MiB
MMC:   SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment

sun4i#zfsload
zfsload - load binary file from a ZFS filesystem

sun4i#zfsload mmc 0:2 0x48000000 /boot/@/uImage
Loading file "/boot/@/uImage" from mmc device 0:2 xxa2
zfs fsname = '/boot/' snapname='<NULL>' filename = '/uImage'
4230340 bytes read

sun4i#bootm 0x48000000
## Booting kernel from Legacy Image at 48000000 ...
  Image Name:   Linux-3.0.8+
  Image Type:   ARM Linux Kernel Image (uncompressed)
  Data Size:    4230276 Bytes = 4 MiB
  Load Address: 40008000
  Entry Point:  40008000
  Verifying Checksum ... OK
  Loading Kernel Image ... OK
OK

Starting kernel ...

DRAM: 512[    0.000000] Initializing cgroup subsys cpuset