Llink:compatible players: Difference between revisions
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
== | == Sources for llink == | ||
Latest Linux | Latest sources are here: | ||
[http://www.lundman.net/ftp/llink/llink-2.3.0.tar.gz llink-2.3.0.tar.gz] | |||
If you want UPNP support, you also need to get clinkc-2.4 and clinkav-2.4. Until these are officially released, you can get them here: | |||
[http://www.lundman.net/ftp/llink/clinkc-2.4.tar.gz clinkc-2.4.tar.gz] | |||
[http://www.lundman.net/ftp/llink/clinkcav-2.4.tar.gz clinkcav-2.4.tar.gz] | |||
To compile them, I would do something like: | |||
cd /your/compile/area/ | |||
tar -zxf clinkc-2.4.tar.gz | |||
cd clinkc-2.4 | |||
./configure --enable-anyaddr | |||
make | |||
(make install - if you are root, or use the direct path in the following compiles) | |||
cd /your/compile/area/ | |||
tar -zxf clinkcav-2.4.tar.gz | |||
cd clinkcav-2.4 | |||
./configure CPPFLAGS=-I/your/compile/area/clinkc-2.4/include LDFLAGS=-L/your/compile/area/clinkc-2.4/lib/unix/ LIBS="" | |||
make | |||
(make install - if you want) | |||
Here the CPPFLAGS and LDFLAGS are needed if you did not "make install". The LIBS="" part in the end will depend on your system. On OSX, I would use LIBS="-lexpat", on Linux LIBS="-lexpat -lpthread -luuid" | |||
cd /your/compile/area/ | |||
tar -zxf lupnp-1.0.tar.gz | |||
cd lupnp-1.0 | |||
./configure CPPFLAGS="-I/your/compile/area/clinkc-2.4/include -I/your/compile/area/clinkcav-2.4/include" LDFLAGS=-L/your/compile/area/clinkcav-2.4/lib/unix/.libs LIBS="" | |||
make | |||
Here the CPPFLAGS and LDFLAGS are needed if you did not "make install". The LIBS="" part in the end will depend on your system. On OSX, I would use LIBS="-lexpat", on Linux LIBS="-lexpat -lpthread -luuid" | |||
cd /your/compile/area/ | |||
tar -zxf llink-2.3.0.tar.gz | |||
./configure --enable-clinkc --without-openssl CPPFLAGS="-I/your/compile/area/clinkc-2.4/include -I/your/compile/area/clinkcav-2.4/include -I/your/compile/area/lupnp-1.0/" LDFLAGS="-L/your/compile/area/clinkcav-2.4/lib/unix/.libs -L/your/compile/area/lupnp-1.0/lib/.libs" LIBS="" | |||
make | |||
Here the CPPFLAGS and LDFLAGS are needed if you did not "make install". The LIBS="" part in the end will depend on your system. On OSX, I would use LIBS="-lexpat", on Linux LIBS="-lexpat -lpthread -luuid" | |||
<paypal></paypal> | <paypal></paypal> | ||
Older | Older sources: | ||
[http://www.lundman.net/ftp/llink/llink-2.2.4.tar.gz llink-2.2.4.tar.gz] | |||
[http://www.lundman.net/ftp/llink/llink-2.2.3.tar.gz llink-2.2.3.tar.gz] | |||
[http://www.lundman.net/ftp/llink/llink-2.2.2.tar.gz llink-2.2.2.tar.gz] | |||
[http://www.lundman.net/ftp/llink/llink-2.2.0.tar.gz llink-2.2.0.tar.gz] | |||
[http://www.lundman.net/ftp/llink/llink-2.1.2.tar.gz llink-2.1.2.tar.gz] | |||
[http://www.lundman.net/ftp/llink/llink-2.1.1.tar.gz llink-2.1.1.tar.gz] | |||
[http://www.lundman.net/ftp/llink/llink-2.1.0.tar.gz llink-2.1.0.tar.gz] | |||
[http://www.lundman.net/ftp/llink/llink-2.0.9.tar.gz llink-2.0.9.tar.gz] | |||
[http://www.lundman.net/ftp/llink/llink-2.0.8.tar.gz llink-2.0.8.tar.gz] | |||
[http://www.lundman.net/ftp/llink/llink-2.0.7.tar.gz llink-2.0.7.tar.gz] | |||
[http://www.lundman.net/ftp/llink/llink-2.0.6.tar.gz llink-2.0.6.tar.gz] | |||
[http://www.lundman.net/ftp/llink/llink-2.0.5.tar.gz llink-2.0.5.tar.gz] | |||
[http://www.lundman.net/ftp/llink/llink-2.0.4.tar.gz llink-2.0.4.tar.gz] | |||
[http://www.lundman.net/ftp/llink/llink-2.0.3.tar.gz llink-2.0.3.tar.gz] | |||
[http://www.lundman.net/ftp/llink/llink-2.0.2.tar.gz llink-2.0.2.tar.gz] | |||
[http://www.lundman.net/ftp/llink/llink-2.0.1.tar.gz llink-2.0.1.tar.gz] | |||
[http://www.lundman.net/ftp/llink/llink-2.0.tar.gz llink-2.0.tar.gz] | |||
[http://www.lundman.net/ftp/llink/llink-1.9.9.tar.gz llink-1.9.9.tar.gz] | |||
[http://www.lundman.net/ftp/llink/llink-1.9.6.tar.gz llink-1.9.6.tar.gz] | |||
[http://www.lundman.net/ftp/llink/llink-1.9.5.tar.gz llink-1.9.5.tar.gz] | |||
[http://www.lundman.net/ftp/llink/llink-1.9.4.tar.gz llink-1.9.4.tar.gz] | |||
[http://www.lundman.net/ftp/llink/llink-1.9.2.tar.gz llink-1.9.2.tar.gz] | |||
[http://www.lundman.net/ftp/llink/llink-1.9.1.tar.gz llink-1.9.1.tar.gz] | |||
[http://www.lundman.net/ftp/llink/llink-1.9.tar.gz llink-1.9.tar.gz] | |||
[http://www.lundman.net/ftp/llink/llink-1.8.tar.gz llink-1.8.tar.gz] | |||
[http://www.lundman.net/ftp/llink/llink-1.7.tar.gz llink-1.7.tar.gz] | |||
[http://www.lundman.net/ftp/llink/llink-1.6.tar.gz llink-1.6.tar.gz] | |||
[http://www.lundman.net/ftp/llink/llink-1.5.tar.gz llink-1.5.tar.gz] | |||
[http://www.lundman.net/ftp/llink/llink-1.4.tar.gz llink-1.4.tar.gz] | |||
[http://www.lundman.net/ftp/llink/llink-1.3.tar.gz llink-1.3.tar.gz] | |||
Current testing sources: | |||
[http://www.lundman.net/ftp/llink/llink-2.2.5.tar.gz llink-2.2.5.tar.gz] | |||
CVS Version control | |||
[ | [[CVS]]. | ||
Revision as of 02:48, 21 September 2011
Sources for llink
Latest sources are here:
llink-2.3.0.tar.gz
If you want UPNP support, you also need to get clinkc-2.4 and clinkav-2.4. Until these are officially released, you can get them here:
clinkc-2.4.tar.gz clinkcav-2.4.tar.gz
To compile them, I would do something like:
cd /your/compile/area/ tar -zxf clinkc-2.4.tar.gz cd clinkc-2.4 ./configure --enable-anyaddr make (make install - if you are root, or use the direct path in the following compiles)
cd /your/compile/area/ tar -zxf clinkcav-2.4.tar.gz cd clinkcav-2.4 ./configure CPPFLAGS=-I/your/compile/area/clinkc-2.4/include LDFLAGS=-L/your/compile/area/clinkc-2.4/lib/unix/ LIBS="" make (make install - if you want)
Here the CPPFLAGS and LDFLAGS are needed if you did not "make install". The LIBS="" part in the end will depend on your system. On OSX, I would use LIBS="-lexpat", on Linux LIBS="-lexpat -lpthread -luuid"
cd /your/compile/area/ tar -zxf lupnp-1.0.tar.gz cd lupnp-1.0 ./configure CPPFLAGS="-I/your/compile/area/clinkc-2.4/include -I/your/compile/area/clinkcav-2.4/include" LDFLAGS=-L/your/compile/area/clinkcav-2.4/lib/unix/.libs LIBS="" make
Here the CPPFLAGS and LDFLAGS are needed if you did not "make install". The LIBS="" part in the end will depend on your system. On OSX, I would use LIBS="-lexpat", on Linux LIBS="-lexpat -lpthread -luuid"
cd /your/compile/area/ tar -zxf llink-2.3.0.tar.gz ./configure --enable-clinkc --without-openssl CPPFLAGS="-I/your/compile/area/clinkc-2.4/include -I/your/compile/area/clinkcav-2.4/include -I/your/compile/area/lupnp-1.0/" LDFLAGS="-L/your/compile/area/clinkcav-2.4/lib/unix/.libs -L/your/compile/area/lupnp-1.0/lib/.libs" LIBS="" make
Here the CPPFLAGS and LDFLAGS are needed if you did not "make install". The LIBS="" part in the end will depend on your system. On OSX, I would use LIBS="-lexpat", on Linux LIBS="-lexpat -lpthread -luuid"
<paypal></paypal>
Older sources:
llink-2.2.4.tar.gz llink-2.2.3.tar.gz llink-2.2.2.tar.gz llink-2.2.0.tar.gz llink-2.1.2.tar.gz llink-2.1.1.tar.gz llink-2.1.0.tar.gz llink-2.0.9.tar.gz llink-2.0.8.tar.gz llink-2.0.7.tar.gz llink-2.0.6.tar.gz llink-2.0.5.tar.gz llink-2.0.4.tar.gz llink-2.0.3.tar.gz llink-2.0.2.tar.gz llink-2.0.1.tar.gz llink-2.0.tar.gz llink-1.9.9.tar.gz llink-1.9.6.tar.gz llink-1.9.5.tar.gz llink-1.9.4.tar.gz llink-1.9.2.tar.gz llink-1.9.1.tar.gz llink-1.9.tar.gz llink-1.8.tar.gz llink-1.7.tar.gz llink-1.6.tar.gz llink-1.5.tar.gz llink-1.4.tar.gz llink-1.3.tar.gz
Current testing sources:
llink-2.2.5.tar.gz
CVS Version control
CVS.