Llink:nmt: Difference between revisions

Revision as of 12:07, 15 June 2008

nmt llink binaries

This binary works for the NMT Popcorn Hour A-100 unit, it may work on other NMT units as well.

Basic installation

There are three (3) files needed for installation on the NetworkMediaTank. But the good news is that it requires no difficult instructions.

Installing to hard disk

Download all three files:

llink-installer.html
llink-installer.cgi
llink-2.0.8-nmt.tar.gz

and upload them to your nmt most easily your HDD. You could also use a USB stick, place the files in the root of the stick.

You must also make llink-installer.cgi be executable.

site chmod 755 llink-installer.cgi

Push "Sources" to get your to your nmt start page
Select "HARD_DISK" (or USB stick if you chose that)
Select "Files" (Forth icon on the right. Video, Music, Photos, Files)
Pick "llink-installer.html".
Select "Install to HARD_DISK" - if this fails, you did not make llink-installer.cgi executable
If all goes well, you can now push "Sources" and find "llink-nmt" as a new option.

Running from USB stick

Download all three files:

llink-installer.html
llink-installer.cgi
llink-2.0.8-nmt.tar.gz

Untar the llink-2.0.8-nmt.tar.gz to the root of your USB stick. This should create a directory called llink at the root level. Copy the other two files over. Your USB stick should have:

/llink-installer.html
/llink-installer.cgi
/llink/
/llink/llink
/llink/llink.conf
/llink/skin/

etc. The remaining files are not shown.

You must also make llink-installer.cgi be executable.

Push "Sources" to get your to your nmt start page
Select "USB_DRIVE_A" (or USB_DRIVE_A-1, etc as appropriate)
Select "Files" (Forth icon on the right. Video, Music, Photos, Files)
Pick "llink-installer.html".
Select "Run from USB_DRIVE_A" if this fails, you did not make llink-installer.cgi executable
If all goes well, you can now push "Sources" and find "llink-nmt" as a new option.

Older binaries:

 llink-2.0.1-nmt.tar.gz

@@ Line 1: / Line 1: @@
 == nmt llink binaries ==
 This binary works for the NMT Popcorn Hour A-100 unit, it may work on other NMT units as well.
-(We should take the start_llink.html and browse_llink.html files from llink-on-a-stick and include here. With possible install-llink-on-hdd.html file as well. Schedule free time).
 === Basic installation ===
-Requires Telnet enabled.
-Untar the binary on the internal harddisk. Edit the llink.conf file to point to your media ROOT(s).
+There are three (3) files needed for installation on the NetworkMediaTank. But the good news is that it requires no difficult instructions.
-To start, cd to the llink executable directory and run it:
-<pre>./llink</pre>
-=== Binaries ===
+=== Installing to hard disk ===
-Latest binary:
-  [http://www.lundman.net/ftp/llink/llink-2.0.7-nmt.tar.gz llink-2.0.7-nmt.tar.gz]
+Download all three files:
+ llink-installer.html
+  llink-installer.cgi
+ llink-2.0.8-nmt.tar.gz
+and upload them to your '''nmt''' most easily your HDD. You could also use a USB stick, place the files in the root of the stick.
+'''You must also make ''llink-installer.cgi'' be executable.'''
+ site chmod 755 llink-installer.cgi
+# Push "Sources" to get your to your nmt start page
+# Select "HARD_DISK" (or USB stick if you chose that)
+# Select "Files" (Forth icon on the right. Video, Music, Photos, Files)
+# Pick "llink-installer.html".
+# Select "Install to HARD_DISK" - if this fails, you did not make llink-installer.cgi executable
+# If all goes well, you can now push "Sources" and find "llink-nmt" as a new option.
+=== Running from USB stick ===
+Download all three files:
+ llink-installer.html
+ llink-installer.cgi
+ llink-2.0.8-nmt.tar.gz
+Untar the llink-2.0.8-nmt.tar.gz to the root of your USB stick. This should create a directory called '''llink''' at the root level. Copy the other two files over. Your USB stick should have:
+ /llink-installer.html
+ /llink-installer.cgi
+ /llink/
+ /llink/llink
+ /llink/llink.conf
+ /llink/skin/
+etc. The remaining files are not shown.
+'''You must also make ''llink-installer.cgi'' be executable.'''
+# Push "Sources" to get your to your nmt start page
+# Select "USB_DRIVE_A" (or USB_DRIVE_A-1, etc as appropriate)
+# Select "Files" (Forth icon on the right. Video, Music, Photos, Files)
+# Pick "llink-installer.html".
+# Select "Run from USB_DRIVE_A" if this fails, you did not make llink-installer.cgi executable
+# If all goes well, you can now push "Sources" and find "llink-nmt" as a new option.
 <paypal></paypal>