Llink:synology autostart

Autostarting llink on a Synology NAS

If you want to autostart llink upon boot in your NAS you may use this script.
It is confirmed to work on a CS-406 with firmware 518, but in theory it would work for all x07 and x06 models.

NOTES
Make sure you change the path to llink correctly in the script below.
You use this script at your own risk, the author will not be liable for any problems derived from using this script.

#!/bin/sh

# This script is made available under the GPLv2 terms.
# Written 2008 by Daniel Cervera, dc11ab (at) gmail (dot) com
# With kind help from lundman and Kalle Andersson
# Version 1.1
# This enables autostart of the llink media server on Synology NAS.
# Look at lundman.net or networkedmediatank.com for more information.

# Make sure we have a clean start
if [ "$1" = "stop" ]; then
       killall llink
   exit 0
fi

#Make sure this is the correct path to llink:
llink="/volume1/llink-2.0/llink/src/llink"

#Check if llink exist; if so then run it, else say that it didn't work:
cd  `dirname $llink` && ./llink || echo "$llink or its directory doesn't exist, and check permissions!"

# End of script

Login as root on your NAS. Save the script as S89llink.sh and place it in your llink directory, eg. /volume1/llink-X.Y.Z-synology_x06/src/. Don't use notepad, make sure it's a UNIX compliant editor, such as vi which is available on the NAS. Put a link to this script in the /etc/rc.local.

Change the permissions: $ chmod 755 </path/to/the/script>S89llink.sh

And then llink shall start after reboot. You will see "llink-daemon" on your Syabas media extender.

Notes

The script should not brake after a firmware update, but make sure you have a copy.