LRAID cmds: Difference between revisions
No edit summary |
No edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 390: | Line 390: | ||
# sharemgr show -vp | # sharemgr show -vp | ||
=== SMB Solaris 11.1 === | |||
Unfortunately, Oracle changed everything about sharesmb with Solaris 11.1 | |||
pkg install /service/file-system/smb | |||
svcadm enable -r smb/server | |||
echo "password required pam_smb_passwd.so.1 nowarn" >> /etc/pam.d/other | |||
useradd public | |||
smbadm enable-user public | |||
zfs set share=name=fs1,path=/rpool/fs1,prot=smb rpool/fs1 | |||
zfs set sharesmb=on rpool/fs1 | |||
passwd -r files public | |||
=== Solaris Admin === | === Solaris Admin === | ||
Latest revision as of 00:16, 24 April 2013
$ ssh lraid5 Last login: Sun Jul 3 09:14:04 2011 from totoro Oracle Corporation SunOS 5.11 snv_151a November 2010 lundman@solaris:~$ sudo bash Password: root@solaris:/home/lundman# # uname -a SunOS solaris 5.11 snv_151a i86pc i386 i86pc Solaris
Drives attached to the system:
# cfgadm -al Ap_Id Type Receptacle Occupant Condition sata1/0::dsk/c10t0d0 disk connected configured ok sata1/1::dsk/c10t1d0 disk connected configured ok sata1/2::dsk/c10t2d0 disk connected configured ok sata1/3::dsk/c10t3d0 disk connected configured ok sata1/4::dsk/c10t4d0 disk connected configured ok sata1/5 sata-port empty unconfigured ok
(Ok, there should be a disk in sata1/5, but the kids probably popped it out)
pools
There are two parts to ZFS. The "pool" of storage, and "file-systems". All pool commands are done with "zpool" and all filesystem commands are done with "zfs".
List your pools, you will initially only have the boot pool:
# zpool list NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT rpool 29.8G 5.46G 24.3G 18% 1.00x ONLINE - mypool 4.53T 1.39T 3.14T 30% 1.00x DEGRADED -
Default boot is called "rpool" in Solaris, you can change the name if you want.
Check out the status of your zpools:
# zpool status
pool: rpool
state: ONLINE
scan: none requested
config:
NAME STATE READ WRITE CKSUM
rpool ONLINE 0 0 0
c10t0d0s0 ONLINE 0 0 0
errors: No known data errors
pool: mypool
state: DEGRADED
status: One or more devices has been removed by the administrator.
Sufficient replicas exist for the pool to continue functioning in a
degraded state.
action: Online the device using 'zpool online' or replace the device with
'zpool replace'.
scan: resilvered 27.5G in 0h21m with 0 errors on Thu Jun 30 16:19:20 2011
config:
NAME STATE READ WRITE CKSUM
mypool DEGRADED 0 0 0
raidz1-0 DEGRADED 0 0 0
c10t5d0 REMOVED 0 0 0
c10t4d0 ONLINE 0 0 0
c10t3d0 ONLINE 0 0 0
c10t2d0 ONLINE 0 0 0
c10t1d0 ONLINE 0 0 0
logs
/dev/zvol/dsk/rpool/slog ONLINE 0 0 0
errors: No known data errors
As you can see, "rpool" is the boot pool (root pool), on disk "c10t0d0". (controller 10, target 0, device 0, slice 0). Slice is "partition" in Solaris world. Device is no longer used, as it is a legacy thing from scsi days. "rpool" is a single disk pool.
My main data pool, "mypool" is missing a disk, but otherwise fine lookin'. Finally the "slog" of "mypool" (transaction logs in ZFS) is stored on SSD, this is for speed. This is a "raidz1" (raid 5) setup. I can lose one disk without data loss. (20% used on parity). Use "raidz2" if you want to be able to lose 2 HDDs without loss. (40% used on parity), and so on. You can also "mirror" (raid1).
File systems
ZFS has two kinds of filesystems. Regular ZFS file system, and a "Virtual-Volume". The latter creates a virtual block device (fake disk) which you can then use as a regular disk, ie, format it "ext3" if you really want to, mount it etc. In this case, we create a Volume for "swap", and for "slog". The size of both ZFS-fs, and Volumes, can be changed on the fly.
Listing your filesystems:
# zfs list NAME USED AVAIL REFER MOUNTPOINT rpool 8.04G 21.2G 93K /rpool rpool/ROOT 2.84G 21.2G 31K legacy rpool/ROOT/realtek 2.84G 21.2G 2.71G / rpool/ROOT/solaris 2.04M 21.2G 2.52G / rpool/dump 1019M 21.2G 1019M - rpool/export 141M 21.2G 32K /export rpool/export/home 141M 21.2G 32K /export/home rpool/export/home/lundman 141M 21.2G 141M /export/home/lundman rpool/slog 2.06G 21.9G 1.36G - rpool/swap 2G 23.1G 123M - mypool 1.11T 2.45T 55.9K /mypool mypool/backup 232G 2.45T 232G /backup mypool/data 1.42G 2.45T 1.42G /data mypool/secure 906G 2.45T 906G /media mypool/swap 2G 2.45T 25.6K - mypool/test 54.3K 2.45T 54.3K /mypool/test
Note that default Solaris creates lots of little filesystems, one for each boot (realtek & solaris), one for "dump", "swap", "export" "export/home" and "export/home/lundman". But then, filesystems are really cheap in ZFS, so, why not. Gives you lots of control. Traditionally filesystems were quite monolithic, where as in ZFS they are closer to "mkdir".
Checking the attributes of the "rpool":
# zpool get all rpool NAME PROPERTY VALUE SOURCE rpool size 29.8G - rpool capacity 18% - rpool altroot - default rpool health ONLINE - rpool guid 15126656221277650189 default rpool version 31 default rpool bootfs rpool/ROOT/realtek local rpool delegation on default rpool autoreplace off default rpool cachefile - default rpool failmode wait default rpool listsnapshots off default rpool autoexpand off default rpool dedupditto 0 default rpool dedupratio 1.00x - rpool free 24.3G - rpool allocated 5.46G - rpool readonly off -
You won't change the pool attributes that often, but in this case, "failmode" defines what the system should do if the pool as a failure. In this case "wait" (ie, hang until it is fixed.) Which is not so useful. It is often better for it to "continue" in failure mode, so we can try to fix it.
# zpool set failmode=continue rpool
autoreplace controls if it should automatically replace dead HDD with new HDDs, if it detects you have replaced the hardware. Why not? Unless you want to manually try the commands of course.
autoexpand controls if it should automatically make the pool larger, when all HDDs in the pool have been replaced with larger disks. You probably want this on too.
But we are actually looking at "rpool", the SSD, so the last two options do not really make sense. You want to set the for your data pool though.
Likewise, ZFS filesystems (and Volumes) also have attributes, these are more fun to play with.
# zfs get all rpool rpool type filesystem - rpool creation Fri Dec 24 2:38 2010 - rpool used 8.04G - rpool available 21.2G - rpool referenced 93K - rpool compressratio 1.00x - rpool mounted yes - rpool quota none default rpool reservation none default rpool recordsize 128K default rpool mountpoint /rpool default rpool sharenfs off default rpool checksum on default rpool compression off default rpool atime on default rpool nbmand off default rpool sharesmb off default rpool dedup off default rpool encryption off -
(this list is considerably larger, I just picked out some of the juicier options).
Most are self-explanatory. But note that "quota" here means the "file-system size". If not set (normal) you can create files in there until the pool is full. If set (say 100G) you can only go to 100G of data. "reservation" refers to how much space the fs should reserve in advance. If you set quota to 100G, that directory (user) can fill 100G, but it allocates no space. So if the pool runs out, the user can not actually reach 100G. If you want it to pre-allocate the promised 100G, you set reservation. You probably don't want to. But do note we set it for "swap" since you don't want swap to NOT have the space promised.
"sharenfs" and "sharesmb" controls if it should exported as NFS, or samba. atime is good to disable (speed). "compression" is often good to have on (lessens the disk read/write and expense of CPU - alas, does nothing for media like movies).
Checking swap:
# zfs get all rpool/swap rpool/swap compression off rpool/swap volsize 2G rpool/swap refreservation 2G
So, swap set to use 2G of space, pre-allocated. Note your ZFS Volumes can be compressed. So if you put a "ext3" filesystem on it, ZFS will compress the blocks under it, to take up less space. Very sexy.
You use "format" command in Solaris to play with partitions. This is legacy crap you do no longer need to bother with (Since the boot is already done). Looks like this:
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c10t0d0 <ATA -OCZ-AGILITY -1.4 cyl 3889 alt 2 hd 255 sec 63>
/pci@0,0/pci1043,8496@11/disk@0,0
1. c10t1d0 <ATA-SAMSUNG HD103SI-1113-931.51GB>
/pci@0,0/pci1043,8496@11/disk@1,0
2. c10t2d0 <ATA-SAMSUNG HD103SI-1118-931.51GB>
/pci@0,0/pci1043,8496@11/disk@2,0
3. c10t3d0 <ATA-SAMSUNG HD103SI-1118-931.51GB>
/pci@0,0/pci1043,8496@11/disk@3,0
4. c10t4d0 <ATA-SAMSUNG HD103SI-1118-931.51GB>
/pci@0,0/pci1043,8496@11/disk@4,0
Specify disk (enter its number):
Also note, these days disks over 1TB will generally have 4KB sectors, instead of 512 bytes. Since 512 can run with 4KB sized pool without side-effects, but 4KB HDD can not always handle 512 byte pools without degradation, it is recommended that you create pools for 4KB disks, even if you don't have any right now.
Create a pool from disks:
# zpool create -o async=12 mypool raidz c10t1d0 c10t2d0 c10t3d0 c10t4d0 c10t5d0
You can name it anything you want, don't need to use 'mypool'
# zpool status mypool
zpool don't have to be actual disks either, you can make it on fake files:
# mkfile 1G /var/tmp/fakedisk1 # zpool create playpool /var/tmp/fakedisk1
When you do it "for realz" you want slog on SSD. So create a volume for slog, usually the same size as memory.
# zfs create -V 2G rpool/slog
(-V creates a Volume instead of fs, creating volumes creates a dev node at /dev/zvol/dsk/$poolname/$volumename)
# zfs set refreservation=2G rpool/slog
(pre-allocate the disk space, so slog is guaranteed 2G)
# zfs add mypool log /dev/zvol/dsk/rpool/slog
(Attach the Volume slog from pool rpool, to pool zpool)
Create a file-system:
# zfs create mypool/roger mypool/roger 2.5T 55K 2.5T 1% /mypool/roger
Don't like where it is mounted?
# zfs set mountpoint=/roger mypool/roger
(Note the dataset name, ie pool+fs, starts with pool name 'mypool', no leading slash). ZFS remounts it for you.
And remove it:
# zfs destroy mypool/roger
How you will probably create your media folder:
# zfs create -o mountpoint=/media -o atime=off -o compression=on -o encryption=on mypool/secure Enter passphrase: $password # zfs set sharenfs=rw=@192.168.11,root=@192.168.11 zpool/secure
Note I created "mypool/secure" (dataset name) but asked it to be mounted on "/media". Dataset name, vs mountpoint. Just as you can create "mypool/warez" and have it mounted as "/ftp"
# zfs list mypool/secure mypool/secure 906G 2.45T 906G /media
Confirm that the NFS sharing worked:
# showmount -e 127.0.0.1 export list for 127.0.0.1: /media @192.168.11
CAVEAT: NFS will only work if it can look up hostnames. So your A100/PC needs to live in /etc/hosts on the NAS (and most likely NAS needs to be in hosts on those machines too). Or your router returns some name for those IPs when looked up.
When you set "sharenfs" Solaris will automatically share the volume, but you can control it manually as well.
# zfs shareall # zfs unshare mypool/secure
But you most likely will only need to "shareall" if you use "encryption" with your filesystem. If you do use encrypted, this is what you do after reboot:
# zfs mount mypool/secure Enter passphrase: $password # zfs share mypool/secure (Or # zfs shareall)
All ZFS attributes (or are they called properties?) can have user-defined values. As it happens, llink will read properties called "net.lundman:sharellink" and if set to "on" will add to ROOTs.
# zfs set net.lundman:sharellink=on mypool/secure
Troubles
If you lose a HDD, pull the HDD out of the NAS. And insert a replacement drive.
First you need to tell the OS that a new disk is attached:
# cfgadm -al Ap_Id Type Receptacle Occupant Condition sata1/5 disk connected unconfigured ok
# cfgadm -c configure sata1/5
If you have "autoreplace" set on the pool, you are done. But let's assume you have not.
# zpool status
c10t5d0 FAILED 0 0 0
# zpool replace mypool c10t5d0 c10t5d0
# zpool status
action: Online the device using 'zpool online' or replace the device with
'zpool replace'.
scan: resilvered 27.5G in 0h21m (27%) ETA 4 hours 12 minutes.
NAME STATE READ WRITE CKSUM
mypool DEGRADED 0 0 0
c10t5d0 FAILED 0 0 0
c10t5d0/1 replacing 0 0 0
Snapshots
Snapshots can be useful. If you are to try something new, or do some changes, upgrade OS, protect yourself from accidentally deleting all files.
# zfs list mypool/secure mypool/secure 906G 2.45T 906G /media # zfs snapshot mypool/secure@20110708 # zfs list -t all mypool/secure 906G 2.45T 906G /media mypool/secure@20110708 0 - 906G -
To create a snapshot, just give the dataset name (mypool/secure) @ snapshot-name. It can be any name, but as convention, many people use the date. Note the snapshot is taking 0 bytes of space. It only records the differences. So, let's delete something:
-rwxrwxrwx 1 501 501 250974208 2007-08-22 19:15 make_big_words.avi # rm make_big_words.avi mypool/secure 906G 2.45T 905G /media mypool/secure@20110708 238M - 906G -
Deleted 250M worth of data, so the snapshot now takes up 238M.
If you are happy with the changes, just destroy the snapshot to release the space back.
# zfs destroy mypool/secure@20110708
Am I the only one who is unhappy that the same command 'destroy' is used for both? Since "zfs destroy mypool/secure" and "zfs destroy mypool/secure@20110708" are vastly different. Or even "mypool/secure @20110708". Oops, that space....
However, if you changed your mind, and want it back:
# zfs rollback mypool/secure@20110708 # zfs list -t all mypool/secure 906G 2.45T 906G /media mypool/secure@20110708 1.60K - 906G - # ls -l make_big_words.avi -rwxrwxrwx 1 501 501 250974208 2007-08-22 19:15 make_big_words.avi # zfs destroy mypool/secure@20110708
SMB
How to share with SMB
Enable the SMB servers
# svcadm enable -r smb/server
Join a workgroup
# smbadm join -w workgroup-name
Make sure PAM is told to keep SMB passwords as well:
# vi /etc/pam.conf other password required pam_smb_passwd.so.1 nowarn
at the end of the file.
Set your password again to save SMB password
# passwd username
Turn on sharing for your dataset
# zfs set sharesmb=on mypool/secure OR For example, to specify a resource name of myfs for the ztank/myfs file system, type: # zfs set sharesmb=name=myfs ztank/myfs
Windows is case insensitive, so you most likely want to share your filesystems like this:
# zfs create -o casesensitivity=mixed -o nbmand=on -o sharesmb=name=yourfs ztank/yourfs
Verify that it is being shared:
# sharemgr show -vp
SMB Solaris 11.1
Unfortunately, Oracle changed everything about sharesmb with Solaris 11.1
pkg install /service/file-system/smb svcadm enable -r smb/server echo "password required pam_smb_passwd.so.1 nowarn" >> /etc/pam.d/other useradd public smbadm enable-user public zfs set share=name=fs1,path=/rpool/fs1,prot=smb rpool/fs1 zfs set sharesmb=on rpool/fs1 passwd -r files public
Solaris Admin
General Solaris crap:
The old SYSV style /etc/init.d and /etc/rc2.d/ still exists, but is no longer used. Some older, or legacy programs, may still put start/stop scripts in there. They will work.
The new system uses SMF. List all your services, and states:
# svcs -a legacy_run Jun_06 lrc:/etc/rc2_d/S72autoinstall disabled Jun_06 svc:/network/ipsec/ike:default disabled Jun_06 svc:/network/ftp:default online Jun_06 svc:/network/ssh:default
(Insert giant list here).
You can see S72autoinstall ran with legacy stuff. You have ipsec/ike, but it is not to run. And you have ssh (daemon) and it is running just fine.
If something dies (say, sshd) the SMF system will automatically restart it. This is the main advantage with the new system
To enable something to run:
# svcadm enable ftp
You could use "svcadm enable svc:/network/ftp:default" here, but that is a bit tedious, so as long as it is unique, you can shorten it.
# svcs ftp STATE STIME FMRI online Jun_06 svc:/network/ftp:default
turn it off:
# svcadm disable ftp
Restarting:
# svcadm restart llink
Although, since you know it is going to be restarted automatically, you can just "pkill llink". I mean, it's rude, but works :)
If something dies too many times, they can go into "maintenance" state:
# svcs llink STATE STIME FMRI maintenance Jun_06 svc:/network/llink:default
Then you need to clear its state first.
# svcadm clear llink # svcadm enable llink
Note that SMF has dependency built in. So ssh it dependent on network/physical etc, and will only start when those run correctly:
# svcs -l ssh dependency require_all/none svc:/system/filesystem/local (online) dependency optional_all/none svc:/system/filesystem/autofs (online) dependency require_all/none svc:/network/loopback (online) dependency require_all/none svc:/network/physical (multiple) dependency require_all/none svc:/system/cryptosvc (online) dependency require_all/none svc:/system/utmp (online) dependency optional_all/error svc:/network/ipfilter:default (disabled) dependency require_all/restart file://localhost/etc/ssh/sshd_config (online)
So if something is not starting, it may not be something wrong with that program, but rather that a dependent service is not running.
There is a "hd" program that lists some bits, like your HDD temperatures:
# /data/hd Device Serial Vendor Model Rev Temperature ------ ------ ------ ----- ---- ----------- c10t0d0p0 43M324HP783S ATA OCZ-AGILITY 1.4 255 C (491 F) c10t1d0p0 XHJDWS510824 ATA SAMSUNG HD103SI 1113 31 C (87 F) c10t2d0p0 XGJ90Z400082 ATA SAMSUNG HD103SI 1118 35 C (95 F) c10t3d0p0 XGJ90SB01390 ATA SAMSUNG HD103SI 1118 34 C (93 F) c10t4d0p0 XGJ90Z400080 ATA SAMSUNG HD103SI 1118 34 C (93 F)
I assure you that the SSD is not on fire.
Power management is in /etc/power.conf
# cat /etc/power.conf device-dependency-property removable-media /dev/fb autopm enable autoS3 default cpupm enable cpu-threshold 1s # Auto-Shutdown Idle(min) Start/Finish(hh:mm) Behavior autoshutdown 30 9:00 9:00 noshutdown device-thresholds /pci@0,0/pci8086,244e@1e/pci11ab,11ab@0/disk@0,0 10m device-thresholds /pci@0,0/pci8086,244e@1e/pci11ab,11ab@0/disk@1,0 10m device-thresholds /pci@0,0/pci8086,244e@1e/pci11ab,11ab@0/disk@2,0 10m device-thresholds /pci@0,0/pci8086,244e@1e/pci11ab,11ab@0/disk@3,0 10m device-thresholds /pci@0,0/pci8086,244e@1e/pci11ab,11ab@0/disk@4,0 10m
- The package manager is called "pkg".
# pkg list
# pkg install gnu-emacs-no-x11
# pkg search python
- llink lives in /usr/local/etc/llink/ with binaries in /usr/local/bin/