NMT:firmware: Difference between revisions

From Lundman Wiki
mNo edit summary
No edit summary
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
== Sources for llink ==
== List of compatible streamers ==
Note that this list is not a complete reference, and all listed products are not confirmed, but in theory llink should work with most Syabas middleware hardware. There is a product list maintained on the [http://www.networkedmediatank.com/wiki/index.php/Products NMT wiki].<br>


Latest sources are here:


[http://www.lundman.net/ftp/llink/llink-2.3.1.tar.gz llink-2.3.1.tar.gz]
''Please add to this list if you have found a player confirmed to work with [[llink]].''


If you want UPNP support, you also need to get clinkc-2.4 and clinkav-2.4. Until these are officially released, you can get them here:


  [http://www.lundman.net/ftp/llink/clinkc-2.4.tar.gz clinkc-2.4.tar.gz]  
Syabas NMT powered media players:
  [http://www.lundman.net/ftp/llink/clinkcav-2.4.tar.gz clinkcav-2.4.tar.gz]  
* Confirmed: Popcorn Hour A-100, A-110, B-110, A-200, C-200 [http://www.popcornhour.com popcornhour.com]
* Confirmed: Digitek HDX900, HDX1000 [http://hdx1080.com/ hdx1080.com]
* DuneHD Ultra, [http://www.dune-hd.com/ dune-hd.com]
* ISTAR Mini, [http://istarhd.com/ istarhd.com]
* eGreat EG-M31A, EG-M31B [http://www.egreathd.com egreathd.com]
* Shenzhen Elektron EHP-600, 606 Mini [http://www.elektron-china.com/en/viewproduct.asp?id=180 elektron-china.com]
* CMI SYVIO-200 [http://www.cmicable.com/en/products_details.asp?id=307 cmicable.com]
* Dueple 700D [http://www.dueple.se/ dueple.se]
* Kaiboer K-100 [http://www.kaiboerhd.com/views.asp?hw_id=395 kaiboerhd.com]
* Dragontech ioBox-100HD [http://www.dragontechcorp.com/products/iobox-100hd.htm dragontechcorp.com]
* Balocco Box [http://www.telcominstrument.com/p_359_18_43_balocco-lettore-box-multimediale-nmt-media-player-hdtv-full-hd-matrioska-bittorrent-hdmi-mkv-h264-internet-lan-ethernet-browser-web-nas-upnp-p2p-youtube-harddisc.html telcominstrument.com] (eGreat clone)
* Icy Box IB-MP309HW-B [http://www.networkedmediatank.com/showthread.php?tid=16868 www.networkedmediatank.com] does NOT have colour buttons on remote!
* Popbox V8 [http://www.popbox.com/onlinestore/ http://www.popbox.com/onlinestore/]


If you are on a system where you can "make install", that is considerably easier and wont really need any extra ./configure magic. But if you can not install, and want to compile from the directories,
I would do something like:


cd /your/compile/area/
UPnP players
tar -zxf clinkc-2.4.tar.gz
* PlugPlayer app for iPhone and iPad. [http://www.plugplayer.com/ plugplayer.com]
cd clinkc-2.4
* XBMC, OS X, Live and AppleTV2 tested. [http://xbmc.org/ XBMC]
./configure --enable-anyaddr
* EyeController for iDevices and Android
make
* Softmedia Player
(make install - if you are root, or use the direct path in the following compiles)


cd /your/compile/area/
Other or older players:
tar -zxf clinkcav-2.4.tar.gz
cd clinkcav-2.4
./configure CPPFLAGS=-I/your/compile/area/clinkc-2.4/include LDFLAGS=-L/your/compile/area/clinkc-2.4/lib/unix/ LIBS=""
make
(make install - if you want)
Here the CPPFLAGS and LDFLAGS are needed if you did not "make install". The LIBS="" part in the end will depend on your system. On OSX, I would use LIBS="-lexpat", on Linux LIBS="-lexpat -lpthread -luuid"


cd /your/compile/area/
* Confirmed: Quartek WHD500-V9 (works fine but problem with skins? Need more test info.)
tar -zxf llink-2.3.0.tar.gz
* Confirmed: AVeL LinkPlayer2, [http://www.iodata.com/en/news/060623.htm iodata.com]
./configure --enable-clinkc --without-openssl CPPFLAGS="-I/your/compile/area/clinkc-2.4/include  -I/your/compile/area/clinkcav-2.4/include" LDFLAGS="-L/your/compile/area/clinkcav-2.4/lib/unix/.libs LIBS=""
* Confirmed: Buffalo LinkTheater, [http://www.buffalo-technology.com/products/multimedia/linktheater-ag/linktheater-wireless-ag-network-media-player/ buffalo-technology.com]
make
* Flexcomm Haidee1000, [http://www.flexcomm.com.cn/products/Haidee1000.html flexcomm.com.cn]
Here the CPPFLAGS and LDFLAGS are needed if you did not "make install". The LIBS="" part in the end will depend on your system. On OSX, I would use LIBS="-lexpat", on Linux LIBS="-lexpat -lpthread -luuid"
* NETGEN NETBOX 7600HD
* Viewsonic hdmr-2000
* Sony Playstation 3
* Sony Bravia TV


 
Work done for XBox 360, but unknown if it works yet.
<paypal></paypal>
 
 
 
 
Older sources:
 
[http://www.lundman.net/ftp/llink/llink-2.3.0.tar.gz llink-2.3.0.tar.gz]
[http://www.lundman.net/ftp/llink/llink-2.2.4.tar.gz llink-2.2.4.tar.gz]
[http://www.lundman.net/ftp/llink/llink-2.2.3.tar.gz llink-2.2.3.tar.gz]
[http://www.lundman.net/ftp/llink/llink-2.2.2.tar.gz llink-2.2.2.tar.gz]
[http://www.lundman.net/ftp/llink/llink-2.2.0.tar.gz llink-2.2.0.tar.gz]
[http://www.lundman.net/ftp/llink/llink-2.1.2.tar.gz llink-2.1.2.tar.gz]
[http://www.lundman.net/ftp/llink/llink-2.1.1.tar.gz llink-2.1.1.tar.gz]
[http://www.lundman.net/ftp/llink/llink-2.1.0.tar.gz llink-2.1.0.tar.gz]
[http://www.lundman.net/ftp/llink/llink-2.0.9.tar.gz llink-2.0.9.tar.gz]
[http://www.lundman.net/ftp/llink/llink-2.0.8.tar.gz llink-2.0.8.tar.gz]
[http://www.lundman.net/ftp/llink/llink-2.0.7.tar.gz llink-2.0.7.tar.gz]
[http://www.lundman.net/ftp/llink/llink-2.0.6.tar.gz llink-2.0.6.tar.gz]
[http://www.lundman.net/ftp/llink/llink-2.0.5.tar.gz llink-2.0.5.tar.gz]
[http://www.lundman.net/ftp/llink/llink-2.0.4.tar.gz llink-2.0.4.tar.gz]
[http://www.lundman.net/ftp/llink/llink-2.0.3.tar.gz llink-2.0.3.tar.gz]
[http://www.lundman.net/ftp/llink/llink-2.0.2.tar.gz llink-2.0.2.tar.gz]
[http://www.lundman.net/ftp/llink/llink-2.0.1.tar.gz llink-2.0.1.tar.gz]
[http://www.lundman.net/ftp/llink/llink-2.0.tar.gz llink-2.0.tar.gz]
[http://www.lundman.net/ftp/llink/llink-1.9.9.tar.gz llink-1.9.9.tar.gz]
[http://www.lundman.net/ftp/llink/llink-1.9.6.tar.gz llink-1.9.6.tar.gz]
[http://www.lundman.net/ftp/llink/llink-1.9.5.tar.gz llink-1.9.5.tar.gz]
[http://www.lundman.net/ftp/llink/llink-1.9.4.tar.gz llink-1.9.4.tar.gz]
[http://www.lundman.net/ftp/llink/llink-1.9.2.tar.gz llink-1.9.2.tar.gz]
[http://www.lundman.net/ftp/llink/llink-1.9.1.tar.gz llink-1.9.1.tar.gz]
[http://www.lundman.net/ftp/llink/llink-1.9.tar.gz llink-1.9.tar.gz]
[http://www.lundman.net/ftp/llink/llink-1.8.tar.gz llink-1.8.tar.gz]
[http://www.lundman.net/ftp/llink/llink-1.7.tar.gz llink-1.7.tar.gz]
[http://www.lundman.net/ftp/llink/llink-1.6.tar.gz llink-1.6.tar.gz]
[http://www.lundman.net/ftp/llink/llink-1.5.tar.gz llink-1.5.tar.gz]
[http://www.lundman.net/ftp/llink/llink-1.4.tar.gz llink-1.4.tar.gz]
[http://www.lundman.net/ftp/llink/llink-1.3.tar.gz llink-1.3.tar.gz]
 
 
Current testing sources:
 
[http://www.lundman.net/ftp/llink/llink-2.3.2.tar.gz llink-2.3.2.tar.gz]
 
CVS Version control
 
[[CVS]].

Latest revision as of 05:56, 27 October 2011

List of compatible streamers

Note that this list is not a complete reference, and all listed products are not confirmed, but in theory llink should work with most Syabas middleware hardware. There is a product list maintained on the NMT wiki.


Please add to this list if you have found a player confirmed to work with llink.


Syabas NMT powered media players:


UPnP players

  • PlugPlayer app for iPhone and iPad. plugplayer.com
  • XBMC, OS X, Live and AppleTV2 tested. XBMC
  • EyeController for iDevices and Android
  • Softmedia Player

Other or older players:

  • Confirmed: Quartek WHD500-V9 (works fine but problem with skins? Need more test info.)
  • Confirmed: AVeL LinkPlayer2, iodata.com
  • Confirmed: Buffalo LinkTheater, buffalo-technology.com
  • Flexcomm Haidee1000, flexcomm.com.cn
  • NETGEN NETBOX 7600HD
  • Viewsonic hdmr-2000
  • Sony Playstation 3
  • Sony Bravia TV

Work done for XBox 360, but unknown if it works yet.

Retrieved from "http://lundman.net/wiki/index.php?title=NMT:firmware&oldid=4055"