Clomps conf - Revision history

Lundman at 07:18, 14 May 2014

2014-05-14T07:18:36Z

← Older revision		Revision as of 07:18, 14 May 2014
Line 1:		Line 1:
	=== ~~Vancouver =~~==		# Which FXP.One to connect to. Omit PASS to have app prompt for passwd.
			FXPONE\|HOST=server.that.runs.fxpone.com\|PORT=8885\|USER=admin\|PASS=admin\|ssl=forced

	* Vancouver science museum [http://~~www~~.~~scienceworld~~.ca/]		Define where to connect for the FXP.One engine. It can be the same server as clomps run on, use localhost. If you leave the '''PASS=''' out, then clomps will prompt for passwords.
	* ~~Airport hotel? for 15th and 16th.~~ ~~Days Inn Vancouver Airport, Richmond booked~~		'''ssl=forced''' on this line refers to the connection to the engine. Encryption is a good idea, except if you are using localhost, and nobody else has root on your server.

			# Define sites and paths.
			SITE\|NAME=ASite1\|DIR=/x264-tv/\|USESKIP=1\|INCTEST=%s-(INCOMPLETE)\|NUKETEST=NUKED-%s\|TIMEFILE=.asite.timestamp
			SITE\|NAME=Another\|DIR=/tv-x264/\|USESKIP=1\|INCTEST=%s-(INCOMPLETE)\|NUKETEST=NUKED-%s\|HIDE=American.Idol*
			SITE\|NAME=Another\|HIDE=Additional/HideStrings*
			SITE\|NAME=glftpdSite\|DIR=/tv-x264/\|USESKIP=1\|INCTEST=(INCOMPLETE)-%s\|NUKETEST=!NUKED-%s
			SITE\|NAME=home\|DIR=/tv/\|DIR=/drive2/tv/\|USESKIP=1\|INCTEST=%s-(INCOMPLETE)\|NUKETEST=NUKED-%s

	=~~== Toronto ===~~		Here we define the sites to connect to, and which directories to list. Note that '''home''' has two directories listed, they are combined.
			TIMEFILE=filename can specify the timestamp file, if left out, clomps will make it based on the config filename + .timestamp

	~~Toronto - Medieval times restaurant~~		If you run this clomps.conf now, you will get an output like:
	~~http~~:~~//www.medievaltimes.com/toronto.aspx~~

	~~[http:~~/~~/www~~.~~localsknow~~.ca/~~?sortby=popular locals know]~~		./clomps -vf example.conf
	~~http~~://~~www~~.~~mbam~~.qc.~~ca/en/expositions/~~a~~-venir/faberge~~
			connected to FXP.One
			successfully negotiated SSL
			Successfully connected to FXP.One
			Site glftpdSite processing dir '/tv-x264/'
			Site home processing dir '/tv/'
			Site Another processing dir '/tv-x264/'
			Site ASite1 processing dir '/x264-tv/'
			Site home processing dir '/drive2/tv/'
			Another finished processing: 111 files ( 1/ 4)
			home finished processing: 3135 files ( 2/ 4)
			glftpdSite finished processing: 158 files ( 3/ 4)
			ASite1 finished processing: 166 files ( 4/ 4)


			-----======> DISPLAY MATRIX <======-----

			T \|ASite\|Anoth\|glftp\|home \| New Items
			--+-----+-----+-----+-----+-----------
			d \|INC \|MISS \|MISS \|MISS \| Best.Laid.Plans.2012.1080p.BluRay.X264-7SinS
			d \|INC \|MISS \|MISS \|MISS \| To.Catch.A.Thief.1955.1080p.BluRay.x264-HD4U
			d \| \|MISS \|MISS \|MISS \| The.Summer.Of.Massacre.2011.720p.BluRay.x264-UNTOUCH
			ABLES
			d \| \|MISS \|NUKE \|MISS \| Under.Still.Waters.2008.720p.BluRay.x264-SWAGGERHD

			Which shows new releases, by showing up (names on the right side) they exist somewhere. Any site column with a blank entry, means the release is there and complete. '''INC''' means that the release is incomplete (INCTEST patten matches), and similarly '''NUKE''' means nuked. '''MISS''' means this release is not on this site.

	* rent car 17th to 28th (~17:00)

	=== ~~America~~ ===		=== Automatic queueing ===

	~~Proposed trip~~ to ~~Canada USA in Summer 2011~~. We are ~~staying in Waupoos Island~~, ~~and need to stop in Toronto~~, ~~and Boston~~.		In addition to finding new entries, you can ask clomps to create queues. The queue lines are defines with '''pass number'''. Starting from 1. This means, all queue lines with pass=1 will be started at the same time. Once all pass=1 transfers are complete, clomps will run pass=2. This allows for all-concurrent queueing, or, sequentially queueing.

	~~Since we are in the area, we might as well stop by Niagara Falls. According to Google it is only 4 hours from Boston to New York City. So it would seem prudent to get NYC over with.~~		For example (Spaces added between '\|' separator for readability):

	~~Proposed route:~~		AUTOQ\|PASSNUM=1\|FROM=glftpdSite\|TO=ASite1 \| ACCEPT=the.simpson/family.guy/american.dad/How?I?met?your?mother \| REJECT=FINSUB/AC3 \| INCSKIP
			CONTINUED\|ACCEPT=House/firefly
			CONTINUED\|ACCEPT=orphan.black\|REJECT=webrip*

	~~[http:~~//~~maps~~.~~google~~.~~com/maps/ms?hl=en&ie=UTF8&t=h&msa=0&msid=110604077924445277589~~.~~00048b26bb0a29bc54770&z=6 Google]~~		Which would automatically transfer items from '''glftpdSite''' "/tv-x264/", to '''ASite1''' "/x264-tv/". But only releases matching "the.simpson" etc, unless they are FINSUB* etc. The '''INCSKIP''' tells clomps not to transfer things that are incomplete. Clomps will then only transfer completed-releases. If you remove '''INCSKIP''' clomps will start to move incomplete releases as well.

	~~Areas~~ of ~~interest~~, and ~~possible sleep overs~~.		The right-hand side in ACCEPT and REJECT statements are slash-separated list of matches. Ie, "simpsons/blue.planet" would match on "simpsons" and "blue.planet", with glob-style pattern matching. This means "I.hate.simpsons" would match (in the middle) but "the.blue.planet" would not (since it was not "blue.planet". No starting ""). Note that this would also fail on "Blue_Planet" and "blue planet", since the period "." is literal. The best way is to use "blue?planet". All matches are '''case-insensitive'''.

	~~Niagara Falls~~		CONTINUED lines, can add to the ACCEPT and REJECT lines if placed after an AUTOQ command. It is for readability and flexibility.
	~~NYC: Time Square~~
	~~NYC: Central Park~~
	~~NYC: Nat.History Museum~~
	~~NYC: Statue of Liberty~~, ~~don't care~~ to ~~go to Liberty Island, but at least see it from afar~~. ~~Can you see it from Jersey turnpike?~~
	~~Letchworth national park~~
	~~Dorian Lake theme park~~

	Six Flags Great Adventure, Jackson, New Jersey- Just an 80-minute drive from Manhattan sits the largest theme park in the world. Six Flags Great Adventure features 12 monster roller coasters and includes a Wild Safari. There is also Six Flags Hurricane Harbor right next door (the largest water park in the Northeast). New Jersey Transit also provides bus service from the Port Authority Bus Terminal in Manhattan when the park is open (May-October).

	Jersey Shore, New Jersey- The Jersey Shore starts just a few miles south of New York City. It stretches for almost 130 miles, and along it are private and public beaches. There are numerous activities along the Jersey Shore. A convenient train ride on the NJ Transit trains from Penn Station will get you to several of the towns on the Jersey Shore, including Manasquan and Point Pleasant Beach.		AUTOQ\|PASSNUM=2\|FROM=ASite1\|TO=home \| ACCEPT=* \| REJECT=dvdrip

	Long Island— When you travel to NYC in the summer, a great idea is to check out Long Island. With its beautiful long white sanded beaches you can have it all: the big city and the summer holiday. Many New Yorkers do that every Friday, ~~Saturday and Sunday if it is hot. Take the Long Island Rail Road~~ from ~~Penn Station~~ to ~~Long Beach ($6~~.~~75 one way), and from there go south to the beach itself~~. ~~Take a day trip on the Hampton Jitney from various stops in NYC to the East End, where Long Island wine country is on the North Fork and The Hamptons are on the South Fork.~~		After pass=1 has completed, move '''everything''' from '''ASite1''' to home. Except for dvdrips. Incompletes will also be started.


	~~NYC: Grand Central Station?~~
	~~NYC: Central Zoo~~
	~~NYC: The Cloisters~~

	* NYC hotel on 26th - Salisbury hotel

	* LAX hotel on 29th.
	* rent car LA, 28th 29th.

	* The Kidspace Children’s Museum in Pasadena
	* Science museum
	* Tar pits
	* Anaheim water park

Lundman at 07:18, 14 May 2014

2014-05-14T07:18:18Z

Show changes

Lundman at 07:07, 29 February 2012

2012-02-29T07:07:40Z

Show changes

Lundman at 07:54, 24 February 2012

2012-02-24T07:54:06Z

← Older revision		Revision as of 07:54, 24 February 2012
Line 72:		Line 72:

	Optionals are ''port, pass, ssl''. Should we add fishkey?		Optionals are ''port, pass, ssl''. Should we add fishkey?

			You need to defines the sites with SITE lines, for each one you intend to use. In this case, do '''not''' have a '''DIR=''' section.

			SITE\|NAME=ASite1\|USESKIP=1\|INCTEST=%s-(INCOMPLETE)\|NUKETEST=NUKED-%s
			SITE\|NAME=glftpdsite\|USESKIP=1\|INCTEST=%s-(INCOMPLETE)\|NUKETEST=NUKED-%s


	Add a section:		Add a section:

	TRADE \| NICK=~~clomps~~ \| MATCH=~~botname~~.~~New Release~~ (.) \| SRCSITE=ASite1 \| SRCDIR=/tv \| DSTSITE=glftpdsite \| DSTDIR=/tv \| ACCEPT=simpsons \| REJECT=FINSUB		TRADE \| NICK=(?i)thebot \| MATCH=\[TV\] New Release: <.?> (.) \| SRCSITE=ASite1 \| SRCDIR=/tv \| DSTSITE=glftpdsite \| DSTDIR=/tv \| ACCEPT=simpsons \| REJECT=FINSUB

	~~'''NICK=''' simply ties it to a specific '''IRC''' server defined above. Should fix be fixed? Add a redundant NAME= to IRC line, instead of tying on NICK?~~

	'''MATCH''' is Regular Expression to match on. This does;		'''NICK=''' Is a Regular Expression (RE) match on the nick name. Clomps will ignore other nicks. Here "(?i)" is the PCRE for "case-insensitive", matching on nick "thebot".
			'''MATCH''' is Regular Expression to match a release on. This does;

	* Match on ~~ircbot name~~ ("~~botname~~" ~~in this example~~)		* Match only on section "TV" (Since RE started with "[TV]")
	* Match on new release message ("New Release", which could also be "Completed" or similar messages), to differentiate to "New racer, New SFV, or Halfway-through announces).		* Match on new release message ("New Release", which could also be "Completed" or similar messages), to differentiate to "New racer, New SFV, or Halfway-through announces).
	* Match and parse out the release name, ie "(.*)" and place it in "${releasename}". The part that is in parenthesis. This would unfortunately have to be tuned for each ircbot's output.		* Match and parse out the release name, ie "(.*)" and place it in "${releasename}". The part that is in parenthesis. This would unfortunately have to be tuned for each ircbot's output.
	* If "${releasename}" passes the ACCEPT and REJECT rules;		* If "${releasename}" passes the ACCEPT and REJECT rules, in this case "simpsons and FINSUB;

	The release is then moved from SRCSITE:/SRCDIR/${releasename} -> DSTSITE:/DSTDIR/${releasename}		The release is then moved from SRCSITE:/SRCDIR/${releasename} -> DSTSITE:/DSTDIR/${releasename}

Lundman at 03:54, 24 February 2012

2012-02-24T03:54:23Z

← Older revision		Revision as of 03:54, 24 February 2012
Line 78:		Line 78:

	'''NICK=''' simply ties it to a specific '''IRC''' server defined above. Should fix be fixed? Add a redundant NAME= to IRC line, instead of tying on NICK?		'''NICK=''' simply ties it to a specific '''IRC''' server defined above. Should fix be fixed? Add a redundant NAME= to IRC line, instead of tying on NICK?

	'''MATCH''' is Regular Expression to match on. This does;		'''MATCH''' is Regular Expression to match on. This does;

	* Match on ircbot name ("botname" in this example)		* Match on ircbot name ("botname" in this example)
	* Match on new release message ("New Release", which could also be "Completed" or similar messages), to differentiate to "New racer, New SFV, or Halfway-through announces).		* Match on new release message ("New Release", which could also be "Completed" or similar messages), to differentiate to "New racer, New SFV, or Halfway-through announces).
Line 85:		Line 87:

	The release is then moved from SRCSITE:/SRCDIR/${releasename} -> DSTSITE:/DSTDIR/${releasename}		The release is then moved from SRCSITE:/SRCDIR/${releasename} -> DSTSITE:/DSTDIR/${releasename}

			Should we add SESSIONS=<int> as well? So clomps-irc can be told to limit the number of sessions? Some cases you only ever want to use SESSIONS=1, so all new releases are added to the end of currently active transfers.

			If we allow SESSIONS=2 or more, should we add balancing? round-robin? least-entries-in-queue?

Lundman at 02:56, 23 February 2012

2012-02-23T02:56:46Z

← Older revision		Revision as of 02:56, 23 February 2012
Line 55:		Line 55:
	Which would automatically transfer items from '''glftpdSite''' "/tv-x264/", to '''ASite1''' "/x264-tv/". But only releases matching "the.simpson" etc, unless they are FINSUB* etc. The '''INCSKIP''' tells clomps not to transfer things that are incomplete. Clomps will then only transfer completed-releases. If you remove '''INCSKIP''' clomps will start to move incomplete releases as well.		Which would automatically transfer items from '''glftpdSite''' "/tv-x264/", to '''ASite1''' "/x264-tv/". But only releases matching "the.simpson" etc, unless they are FINSUB* etc. The '''INCSKIP''' tells clomps not to transfer things that are incomplete. Clomps will then only transfer completed-releases. If you remove '''INCSKIP''' clomps will start to move incomplete releases as well.

	The ~~left~~-hand side in ACCEPT and REJECT statements are slash-separated list of matches. Ie, "simpsons/blue.planet" would match on "simpsons" and "blue.planet", with glob-style pattern matching. ~~The~~ means "I.hate.simpsons" would match (in the middle) but "the.blue.planet" would not (since it was not "blue.planet". No starting ""). Note that this would also fail on "Blue_Planet" and "blue planet", since the period "." is literal. The best way is to use "blue?planet". All matches are '''case-insensitive'''.		The right-hand side in ACCEPT and REJECT statements are slash-separated list of matches. Ie, "simpsons/blue.planet" would match on "simpsons" and "blue.planet", with glob-style pattern matching. This means "I.hate.simpsons" would match (in the middle) but "the.blue.planet" would not (since it was not "blue.planet". No starting ""). Note that this would also fail on "Blue_Planet" and "blue planet", since the period "." is literal. The best way is to use "blue?planet". All matches are '''case-insensitive'''.

Lundman at 02:54, 23 February 2012

2012-02-23T02:54:12Z

← Older revision		Revision as of 02:54, 23 February 2012
Line 54:		Line 54:

	Which would automatically transfer items from '''glftpdSite''' "/tv-x264/", to '''ASite1''' "/x264-tv/". But only releases matching "the.simpson" etc, unless they are FINSUB* etc. The '''INCSKIP''' tells clomps not to transfer things that are incomplete. Clomps will then only transfer completed-releases. If you remove '''INCSKIP''' clomps will start to move incomplete releases as well.		Which would automatically transfer items from '''glftpdSite''' "/tv-x264/", to '''ASite1''' "/x264-tv/". But only releases matching "the.simpson" etc, unless they are FINSUB* etc. The '''INCSKIP''' tells clomps not to transfer things that are incomplete. Clomps will then only transfer completed-releases. If you remove '''INCSKIP''' clomps will start to move incomplete releases as well.

			The left-hand side in ACCEPT and REJECT statements are slash-separated list of matches. Ie, "simpsons/blue.planet" would match on "simpsons" and "blue.planet", with glob-style pattern matching. The means "I.hate.simpsons" would match (in the middle) but "the.blue.planet" would not (since it was not "blue.planet". No starting ""). Note that this would also fail on "Blue_Planet" and "blue planet", since the period "." is literal. The best way is to use "blue?planet". All matches are '''case-insensitive'''.


Line 59:		Line 61:

	After pass=1 has completed, move '''everything''' from '''ASite1''' to home. Except for dvdrips. Incompletes will also be started.		After pass=1 has completed, move '''everything''' from '''ASite1''' to home. Except for dvdrips. Incompletes will also be started.


	=== Clomps-irc ===		=== Clomps-irc ===

Lundman at 02:53, 23 February 2012

2012-02-23T02:53:20Z

← Older revision		Revision as of 02:53, 23 February 2012
Line 61:		Line 61:


	=== ~~IrcBot~~ ===		=== Clomps-irc ===

			A separate binary is compiled for the IRC Bot version of clomps. Clomps-irc connects to an IRC server(s), and sits in specified channel(s) to look for "New Release" notifications (or "Completion" messages depending on style).

	To define an ircbot to listen to an irc server / irc channel, add the following line:		To define an ircbot to listen to an irc server / irc channel, add the following line:

	IRC\|server=irc.server.com\|port=6667\|pass=ircpass\|nick=clomps\|user=clomps@fxp.one\|ssl=yes\|channel=#bots		IRC \| server=irc.server.com \| port=6667 \| pass=ircpass \| nick=clomps \| user=clomps@fxp.one \| ssl=yes \| channel=#bots ''\|channel=#another''
			IRC \| server=irc.server2.com \| port=6667 \| pass=ircpass \| nick=clomps2 \| user=clomps@fxp.one \| ssl=no \| channel=#spew

			Optionals are ''port, pass, ssl''. Should we add fishkey?

	~~Optionals are port, pass, ssl. Should we add fishkey?~~		Add a section:

	~~When defining queues, we need to be able to specify the matching patterns:~~ ~~new release~~tv*~~the.~~simpsons~~, or possibly just trigger it to connect, why specify patterns twice?~~		TRADE \| NICK=clomps \| MATCH=botname.New Release (.) \| SRCSITE=ASite1 \| SRCDIR=/tv \| DSTSITE=glftpdsite \| DSTDIR=/tv \| ACCEPT=simpsons \| REJECT=FINSUB

	~~Since we only want one bot for~~ (~~possibly~~) ~~many sections~~, ~~how do we define this?~~ The ~~AUTOQ line will need~~ to ~~have~~ the ~~src~~ and ~~dst dirs specified.~~		'''NICK=''' simply ties it to a specific '''IRC''' server defined above. Should fix be fixed? Add a redundant NAME= to IRC line, instead of tying on NICK?
			'''MATCH''' is Regular Expression to match on. This does;
			* Match on ircbot name ("botname" in this example)
			* Match on new release message ("New Release", which could also be "Completed" or similar messages), to differentiate to "New racer, New SFV, or Halfway-through announces).
			* Match and parse out the release name, ie "(.*)" and place it in "${releasename}". The part that is in parenthesis. This would unfortunately have to be tuned for each ircbot's output.
			* If "${releasename}" passes the ACCEPT and REJECT rules;

	~~Or should the irc conf be completely different~~ from ~~regular clomps.conf~~		The release is then moved from SRCSITE:/SRCDIR/${releasename} -> DSTSITE:/DSTDIR/${releasename}

Lundman at 02:52, 23 February 2012

2012-02-23T02:52:20Z

← Older revision		Revision as of 02:52, 23 February 2012
Line 1:		Line 1:
	~~==The~~ FXP.One ~~clients~~==		# Which FXP.One to connect to. Omit PASS to have app prompt for passwd.
			FXPONE\|HOST=server.that.runs.fxpone.com\|PORT=8885\|USER=admin\|PASS=admin\|ssl=forced

	~~This is a known list of [[~~FXP.One~~]] clients~~. If you ~~make~~ a ~~new one~~, ~~feel free to add it here~~.		Define where to connect for the FXP.One engine. It can be the same server as clomps run on, use localhost. If you leave the '''PASS=''' out, then clomps will prompt for passwords.
			'''ssl=forced''' on this line refers to the connection to the engine. Encryption is a good idea, except if you are using localhost, and nobody else has root on your server.

			# Define sites and paths.
			SITE\|NAME=ASite1\|DIR=/x264-tv/\|USESKIP=1\|INCTEST=%s-(INCOMPLETE)\|NUKETEST=NUKED-%s\|LAST_CHECK=1329887220
			SITE\|NAME=Another\|DIR=/tv-x264/\|USESKIP=1\|INCTEST=%s-(INCOMPLETE)\|NUKETEST=NUKED-%s\|LAST_CHECK=1329897720
			SITE\|NAME=glftpdSite\|DIR=/tv-x264/\|USESKIP=1\|INCTEST=(INCOMPLETE)-%s\|NUKETEST=!NUKED-%s\|LAST_CHECK=1329919260
			SITE\|NAME=home\|DIR=/tv/\|DIR=/drive2/tv/\|USESKIP=1\|INCTEST=%s-(INCOMPLETE)\|NUKETEST=NUKED-%s\|LAST_CHECK=1329828420

			Here we define the sites to connect to, and which directories to list. Note that '''home''' has two directories listed, they are combined.
			You do not need to specify '''LAST_CHECK''', it is added by clomps automatically. Leave it out if you are creating a new conf. It has the "newest most item's date" stored, so we know what is newer, for each site.

	~~=== FXP~~.~~cOne ===~~		If you run this clomps.conf now, you will get an output like:

	'''* FXP.~~cOne~~ (~~CDK/ncurses client~~)'''		./clomps -vf example.conf

			connected to FXP.One
			successfully negotiated SSL
			Successfully connected to FXP.One
			Site glftpdSite processing dir '/tv-x264/'
			Site home processing dir '/tv/'
			Site Another processing dir '/tv-x264/'
			Site ASite1 processing dir '/x264-tv/'
			Site home processing dir '/drive2/tv/'
			Another finished processing: 111 files ( 1/ 4)
			home finished processing: 3135 files ( 2/ 4)
			glftpdSite finished processing: 158 files ( 3/ 4)
			ASite1 finished processing: 166 files ( 4/ 4)


			-----======> DISPLAY MATRIX <======-----

			T \|ASite\|Anoth\|glftp\|home \| New Items
			--+-----+-----+-----+-----+-----------
			d \|INC \|MISS \|MISS \|MISS \| Best.Laid.Plans.2012.1080p.BluRay.X264-7SinS
			d \|INC \|MISS \|MISS \|MISS \| To.Catch.A.Thief.1955.1080p.BluRay.x264-HD4U
			d \| \|MISS \|MISS \|MISS \| The.Summer.Of.Massacre.2011.720p.BluRay.x264-UNTOUCH
			ABLES
			d \| \|MISS \|NUKE \|MISS \| Under.Still.Waters.2008.720p.BluRay.x264-SWAGGERHD

			Which shows new releases, by showing up (names on the right side) they exist somewhere. Any site column with a blank entry, means the release is there and complete. '''INC''' means that the release is incomplete (INCTEST patten matches), and similarly '''NUKE''' means nuked. '''MISS''' means this release is not on this site.

	~~[[Image:fxp.cone.screen1.jpg\|right\|thumb\|100px\|FXP.cOne]]~~

	This [[FXP.One]] client ships with the FXP.One packages and will be compiled automatically if '''./configure''' can find '''ncurses''' and the special version of '''CDK'''. Download the CDK library from [http://invisible-island.net/cdk/ http://invisible-island.net/cdk/]		=== Automatic queueing ===

	~~Until the local site can be added the client~~, if you ~~wish~~ to create a '''~~local~~''' ~~site~~, ~~please use ''<local>'' as~~ the ~~setting~~ for ~~'''host'''~~, ~~'''user''' and '''pass'''~~.		In addition to finding new entries, you can ask clomps to create queues. The queue lines are defines with '''pass number'''. Starting from 1. This means, all queue lines with pass=1 will be started at the same time. Once all pass=1 transfers are complete, clomps will run pass=2. This allows for all-concurrent queueing, or, sequentially queueing.

			For example (Spaces added between '\|' separator for readability):

	~~Status: Beta: Completely Functional, but missing much cosmetics~~. ~~Knowns bugs exist~~.		AUTOQ\|PASSNUM=1\|FROM=glftpdSite\|TO=ASite1 \| ACCEPT=the.simpson/family.guy/american.dad/How?I?met?your?mother \| REJECT=FINSUB/AC3 \| INCSKIP

			Which would automatically transfer items from '''glftpdSite''' "/tv-x264/", to '''ASite1''' "/x264-tv/". But only releases matching "the.simpson" etc, unless they are FINSUB* etc. The '''INCSKIP''' tells clomps not to transfer things that are incomplete. Clomps will then only transfer completed-releases. If you remove '''INCSKIP''' clomps will start to move incomplete releases as well.

	~~=== clomps ===~~

	~~'''~~* ~~clomps (console multiple site 'whats new?' query program, with auto-queue support)'''~~		AUTOQ\|PASSNUM=2\|FROM=ASite1\|TO=home \| ACCEPT=* \| REJECT=dvdrip

	~~[[Image:clomps~~.~~screen1~~.~~jpg\|right\|thumb\|100px\|clomps]]~~		After pass=1 has completed, move '''everything''' from '''ASite1''' to home. Except for dvdrips. Incompletes will also be started.

	This [[FXP.One]] client ships with the FXP.One packages and will be compiled automatically. It is a console only application that connects to multiple servers, works out what entries are '''new''' since it last ran, and presents a matrix of where files/directories are, and are missing. It can also automatically '''mirror''' between sites, in multiple ways, using the pass- and skip- lists. It can setup up sequential mirroring (A->B, then B->C) or concurrent mirroring. (A->B and A->C).

	~~The latest Windows binary is available here (includes clomps binary):~~		=== IrcBot ===
	~~[http://www.lundman.net/ftp/fxp-one-1.9-win32.zip fxp-one-1.9-win32.zip]~~

	~~Older~~:		To define an ircbot to listen to an irc server / irc channel, add the following line:
	~~[http://www.lundman.net/ftp/clomps-v1.0.zip clomps-v1.0.zip]~~

			IRC\|server=irc.server.com\|port=6667\|pass=ircpass\|nick=clomps\|user=clomps@fxp.one\|ssl=yes\|channel=#bots

	~~[[clomps_conf\|Example]] configuration file for clomps~~		Optionals are port, pass, ssl. Should we add fishkey?

	~~=== Ixodes ===~~		When defining queues, we need to be able to specify the matching patterns: new releasetv*the.simpsons, or possibly just trigger it to connect, why specify patterns twice?

	~~This [[FXP.One]] client is a GTK GUI client made on Python by a colleague. This client was never released and was made as a test-case~~ for the ~~'''UFxp''' client~~.		Since we only want one bot for (possibly) many sections, how do we define this? The AUTOQ line will need to have the src and dst dirs specified.

	~~Status: deprecated.~~		Or should the irc conf be completely different from regular clomps.conf


	~~=== UFxp ===~~

	This [[FXP.One]] client is a Ultimate++ GUI client. This is an external client and the most complete GUI client at the moment. This is most likely what new users wants to use, unless they are in a console only environment. Please see the ~~[[UFxp]] home page for more information.~~

	~~Status: beta, fully functional.~~

	~~[[Image:ufxp.screen1~~.~~jpg\|right\|thumb\|100px\|UFxp]]~~

Lundman at 02:48, 23 February 2012

2012-02-23T02:48:00Z

@@ Line 1: / Line 1: @@
-Wine
+==The FXP.One clients==
-Wine is definitely an alcoholic beverage, done of fermented fruit juice, in most cases from grapes. The natural chemical balance of grapes allows them ferment minus the addition of sugars, acids, enzymes, or any other vitamins. Grape wine is produced by fermenting crushed grapes implementing several forms of yeast. Yeast consumes the sugars during the grapes and converts them into booze. Distinct [http://winetypessite.com/top-10-types-of-red-wine-and-4-factors-that-make-them-unique/ Types of Red Wine] and strains of yeasts manufacture differing types of wine.
-[http://winetypessite.com/what-is-organic-wine-and-where-do-i-buy-organic-wine-online/ Organic Wine] constructed from other fruits, which include apples and berries, are often named upon the fruit from which they really are created (one example is, apple wine or elderberry wine) and so are generically described as fruit wine or region wine (to not be puzzled using the French term vin de pays). Some others, similar to barley wine and rice wine (i.e., sake), are created from starch-based supplies and resemble beer and spirit much more than wine, as ginger wine is fortified with brandy. In these circumstances, the term "wine" refers towards greater booze articles somewhat as opposed to manufacturing practice. The industrial utilization of the English word "wine" (and its equal in other languages) is secured by law in lots of jurisdictions.
+This is a known list of [[FXP.One]] clients. If you make a new one, feel free to add it here.
-Wine carries a wealthy heritage dating back a large number of several years, along with the earliest recognized production taking place around eight,000 a long time ago within the territory of modern-day Georgia. It primary appeared inside the Balkans at about 4500 BC and was very common in ancient Greece, Thrace and Rome. Wine has also performed an important function in faith in the course of background. The Greek god Dionysus as well as the Roman equal Bacchus represented wine, as well as drink can be applied in Christian Eucharist ceremonies plus the Jewish Kiddush (between various other Jewish ceremonies).
-Grape versions
-Wine is commonly made out of one or more versions with the European species Vitis vinifera, that include Pinot Noir, Chardonnay, Cabernet Sauvignon, Gamay and Merlot. When among these varieties is chosen as being the predominant grape (usually defined by law being a minimal of 75% or 85%), the outcome can be described as varietal, in contrast to a blended, wine. Blended wines commonly are not considered inferior to varietal wines, rather they really are a unique style of wine building; most of the world's most expensive wines, from locations like Bordeaux and the Rhone Valley, are blended from numerous grape varieties.[citation needed]
+=== FXP.cOne ===
-Wine can be created from other species of grape or from hybrids, created by the genetic crossing of two species. Vitis labrusca (of which the Concord grape is a cultivar), Vitis aestivalis, Vitis rupestris, Vitis rotundifolia and Vitis riparia are native North American grapes quite often developed to try to eat recent or for grape juice, jam, or jelly, but oftentimes made into wine.
-Hybridization differs from grafting. The vast majority of the world's vineyards are planted with European V. vinifera vines which have been grafted onto North American species rootstock.
+'''* FXP.cOne (CDK/ncurses client)'''
-This is popular apply given that North American grape species are resistant to phylloxera, a root louse that in due course kills the vine. Within the late nineteenth century, a majority of Europe's vineyards (only excluding most of the driest vineyards in Southern Europe) ended up devastated by bug, bringing about significant vine fatalities and eventual replanting. Grafting is finished in nearly every wine-producing region of the world except for Argentina, the Canary Islands and Chile-the only nations not nevertheless uncovered with the insect.
-From the context of wine manufacturing, terroir is usually a thought that encompasses the versions of grapes chosen, elevation and shape of the vineyard, sort and chemistry of soil, climate and seasonal circumstances, together with the local yeast cultures. The choice of opportunities listed here may end up in excellent differences concerning wines, influencing the fermentation, finishing, and getting older processes at the same time. Several wineries use expanding and creation techniques that preserve or accentuate the aroma and style influences of their exceptional terroir. On the other hand, taste variances are certainly not fascinating for producers of mass-market table wine or other less costly wines, the place consistency is much more fundamental. These types of producers strive to reduce variances in sources of grapes due to manufacturing tactics which includes micro-oxygenation, tannin filtration, cross-flow filtration, thin film evaporation, and spinning cones.
+[[Image:fxp.cone.screen1.jpg|right|thumb|100px|FXP.cOne]]
-Vintages
-A "vintage wine" is 1 made out of grapes which were all or primarily grown inside a distinct calendar year, and labeled as these types of. Some nations around the world allow a vintage wine to incorporate a little portion which is not through the labeled classic. Variations in a very wine's character from 12 months to yr can include subtle variances in color, palate, nose, entire body and enhancement. High-quality wines can better in taste with age if accurately stored. As a result, it isn't uncommon for wine fanatics and investors to save bottles of an in particular wonderful vintage wine for potential intake.
+This [[FXP.One]] client ships with the FXP.One packages and will be compiled automatically if '''./configure''' can find '''ncurses''' and the special version of '''CDK'''. Download the CDK library from [http://invisible-island.net/cdk/ http://invisible-island.net/cdk/]